Water Damage Restoration in Clovis - Live Dispatcher Now, Crew On Site Fast

Damage Restoration in Clovis, CA

Mold remediation in Clovis is typically a $1,200-$6,000 job depending on how far the growth has traveled, and the heat here makes early detection critical. Stucco tract homes from the 1990s through 2010s dominate northeast Clovis, and their minimal moisture detailing lets small leaks turn into hidden wall cavity mold during the first 105°F week. Fire and smoke work carries its own Clovis signature: the 2020 Creek Fire pushed ash and particulate deep into HVAC systems along the Copper and Loma Vista corridors, and full duct replacement is often the only fix that holds. Call (629) 213-4606 and we’ll give you a written price before anything starts.

Call (629) 213-4606

Why Clovis Homes Are Different

Two forces shape restoration work in Clovis. The first is the housing stock: large stucco subdivisions built during the northeast expansion years of the 1990s through 2010s were engineered for a sub-12-inch rainfall baseline, so window flanges, weep screeds, and roof-to-wall transitions often lack the redundancy needed when an atmospheric river drops three inches in 18 hours. The second is the heat. The San Joaquin Valley regularly hits 105°F to 110°F in summer, and that thermal load compresses every moisture event into a race: a slow plumbing leak that would take two weeks to grow mold in a coastal city can produce visible colonization in 72 hours here.

Older central Clovis and Old Town neighborhoods add a third variable. Their 1950s through 1970s wood-frame homes carry aging rooflines that fail at the eave and the valley first, and the resulting water intrusion usually goes unnoticed until the ceiling stains or the baseboards cup. That kind of delayed discovery is the difference between a $900 drying job and a $5,000 mold remediation recon. In the foothill-adjacent northeast tracts, smoke intrusion is the wildcard: continuous HVAC fan operation during wildfire season pulls particulate past the filter media and into the duct liner and attic insulation. Superficial odor treatments fail on those jobs, which is why we scope every affected home with a psychrometric assessment, a document showing exactly where moisture, particulate, and odor conditions stand room by room.

Our Main Clovis Services

Clovis homeowners call us most often about water intrusion after storm events or plumbing failures, and about the smoke and ash remediation that follows a foothills wildfire. Both jobs run on documentation: a written scope before work begins, a daily drying log, and a photo record on every visit.

Water Damage Restoration in Clovis

Water moves fast through the flat slab-on-grade construction common to Clovis subdivisions, and once it reaches the wall baseplates it starts wicking upward inside the cavity. Our crews run Dri-Eaz and Phoenix drying systems sized to the affected square footage, and we log moisture readings room by room until the structure reads dry, not just the air. Every Clovis job includes a written scope and a photo record on every visit. See the full breakdown at Water Damage Restoration in Clovis.

Storm & Disaster Restoration in Clovis

Atmospheric river events hit Clovis homes that were not built for them, overwhelming roof drainage and saturating crawlspaces on the older central lots. We arrive with extraction, drying, and tarping capacity, and we document everything: the written scope comes before work starts, and the drying log is delivered with the final invoice. See the complete storm response scope at Storm & Disaster Restoration in Clovis.

Before

After

Mold Remediation in Clovis

Mold remediation in Clovis usually runs $1,200 to $6,000, with the spread driven by whether the growth is contained behind a single wall cavity or has spread through the HVAC supply side into multiple rooms. The heat here is the accelerant: a pinhole leak behind a kitchen cabinet that would stay dormant in a coastal city produces active colonization within a week at 105°F ambient. Our process starts with a documented inspection, not a guess, and the written scope itemizes exactly what gets removed and what gets cleaned. Learn more about our full Mold Remediation protocol.

Mold Inspection & Testing

Signs you need it

A persistent musty odor behind walls or in cabinets that does not clear with ventilation, especially in rooms that share a wall with a bathroom or kitchen plumbing run, means hidden moisture and likely active growth.

What it costs in Clovis

Mold inspection and testing in Clovis typically runs $350-$650 depending on the number of rooms sampled and the type of analysis requested.

How we do it

We document visible conditions with photos, take air and surface samples where the moisture meter reading justifies it, and deliver a written finding that states exactly what was found, not what it felt like.

Black Mold Remediation

Signs you need it

Dark green-black growth on wallboard, baseboards, or ceiling tiles, often paired with a sharp, earthy odor that intensifies when the HVAC cycles on, indicates a colony that needs immediate professional attention.

What it costs in Clovis

Black mold remediation in Clovis generally runs $1,500-$5,000 depending on the affected square footage and whether the growth has reached the insulation or framing.

How we do it

We contain the work area under negative pressure, remove affected materials to clean framing, treat the cavity with antimicrobials, and return with a clearance test that confirms the space reads dry and clean.

What Mold Remediation Costs in Clovis

How fast can mold spread in a Clovis summer?

At 105°F ambient with any moisture source present, visible colonization can appear within 72 hours and spread into adjacent cavities within a week. During July and August, the window from first sign to full remediation is narrower than in any coastal California market.

Is mold remediation covered by insurance in Clovis?

It depends on the moisture source. A sudden pipe failure or storm event is typically covered; a slow, undetected leak may not be. Our documentation, including the moisture log, is built to give your adjuster the evidence they need to process the claim correctly. Call (629) 213-4606 to discuss your policy.

Fire & Smoke Damage Restoration in Clovis

Fire and smoke restoration in Clovis carries a specific risk profile because the northeast neighborhoods sit at the edge of Sierra Nevada wildfire country. Homes along the Copper, Herndon, and Loma Vista corridors were the closest suburban structures to the 2020 Creek Fire’s burn path, and that event taught us what this trade has to unlearn here: superficial odor treatments do not survive a Clovis summer, because the particulate is embedded in the duct liner and the attic insulation. Full removal and replacement is the standard scope when homes ran continuous fan operation through a smoke event. See our Fire & Smoke Damage Restoration process.

Smoke & Soot Removal

Signs you need it

Visible soot films on windowsills and light fixtures, a persistent campfire odor that strengthens when the furnace runs, and gray dust on horizontal surfaces days after the fire are all markers that smoke has entered the envelope.

What it costs in Clovis

Smoke and soot removal in Clovis typically runs $1,500-$6,000 depending on whether the work is surface-level or includes duct and attic insulation replacement.

How we do it

We clean all affected surfaces with trade-specific media, replace contaminated duct liner and attic insulation where the particulate load demands it, and verify the result with air sampling, not with an odor test alone.

Contents Cleaning & Pack-Out

Signs you need it

Belongings that smell of smoke days after the event, especially soft goods like clothing and upholstery, have absorbed particulate and need either full ultrasonic cleaning or replacement.

What it costs in Clovis

Contents cleaning and pack-out in Clovis generally runs $2,000-$8,000 depending on the inventory volume and the cleaning method required.

How we do it

We document every item before it leaves the home, clean soft goods through ultrasonic or ozone processes where the material allows, and return an itemized sheet showing what was restored and what was replaced.

What Fire & Smoke Damage Restoration Costs in Clovis

Why did the 2020 Creek Fire smoke jobs need full duct replacement?

Continuous HVAC fan operation during the smoke event pulled fine particulate past the filter and into the supply-side duct liner and insulation. Surface odor treatments failed on those homes; only full duct replacement and attic insulation removal cleared the odor permanently.

Do I need to replace my attic insulation after a wildfire smoke event?

If your home ran continuous fan operation during heavy smoke and the insulation is fiberglass batt or blown-in material, the particulate has likely settled throughout the attic. In our experience on Creek Fire-affected Clovis homes, replacement was necessary on most of the ones with sustained smoke exposure. Call (629) 213-4606 for a written assessment.

Sewage Cleanup in Clovis

Sewage backup in Clovis is a black water event that requires professional extraction and disinfection, not a mop and bleach. The flat slab construction common to the northeast tracts means a mainline backup often surfaces at the lowest point in the home, usually a ground-floor bathroom or laundry room, and spreads across the slab before the homeowner even sees it. See our Sewage Cleanup protocol for the full scope.

Sewage Backup Cleanup

Signs you need it

Water backing up from a floor drain or toilet when the washing machine runs, gurgling from multiple drains, or a persistent sewage odor near a ground-floor fixture indicates a mainline or branch line failure.

What it costs in Clovis

Sewage backup cleanup in Clovis generally runs $2,000-$6,000 depending on the affected square footage and whether the contamination reached wall cavities or under-cabinet spaces.

How we do it

We extract the standing water, remove contaminated porous materials, disinfect all affected surfaces, and document the work with photos and moisture readings at every stage.

Black Water Extraction

Signs you need it

Any water that has come into contact with feces, urine, or floodwater is classified as black water and requires professional extraction and disinfection, not a wet vac and time.

What it costs in Clovis

Black water extraction in Clovis typically runs $1,500-$5,000 for the extraction, removal, and disinfection of a single-room event.

How we do it

We use truck-mounted or portable extraction depending on access, remove contaminated material to the framing where required, and treat every exposed surface with an EPA-registered disinfectant, documenting each step in the daily log.

What Sewage Cleanup Costs in Clovis

Is sewage backup covered by homeowners insurance?

Most standard policies cover sudden, accidental sewage backup only if you have purchased a specific endorsement. Without that rider, the damage is generally not covered. Our written documentation is built to support whatever claim path your policy allows. Call (629) 213-4606 to confirm your coverage.

How fast do you respond to a sewage backup in Clovis?

We answer the emergency line 24 hours a day, 7 days a week with a live person. Dispatch to Clovis is typically same-day for sewage events because the contamination spread window is measured in hours, not days.

Biohazard & Crime Scene Cleanup in Clovis

Biohazard and crime scene cleanup in Clovis is regulated, documented work that requires bloodborne pathogen training and proper disposal channels, not a cleaning crew with standard supplies. These jobs carry a documentation weight no other restoration service does: every step, every material, every disposal record has to stand up to a law enforcement file or a family’s insurance claim. We approach it exactly that way. See the full Biohazard & Crime Scene Cleanup scope.

Trauma & Unattended Death Cleanup

Signs you need it

An unattended death, accident, or medical emergency leaves biological material that requires professional remediation under bloodborne pathogen standards, not a household cleaning.

What it costs in Clovis

Trauma and unattended death cleanup in Clovis generally runs $2,500-$8,000 depending on the extent of the affected area and the materials that must be removed.

How we do it

We contain the affected area, remove contaminated porous materials, disinfect all surfaces to the documented standard, and provide a full disposal manifest that the family or the adjuster can retain.

Hoarding Cleanup

Signs you need it

Accumulated belongings that block access to walls, plumbing, or electrical panels often conceal structural damage, pest activity, and biohazard material that standard cleaning does not address.

What it costs in Clovis

Hoarding cleanup in Clovis typically runs $3,000-$10,000+ depending on the volume, the level of biohazard present, and the structural work required underneath.

How we do it

We work item by item with the homeowner or the family to sort, document, and remove contents, then assess the underlying structure for damage and contamination before the cleaning begins.

What Biohazard & Crime Scene Cleanup Costs in Clovis

Does insurance cover biohazard cleanup in Clovis?

Homeowners policies often cover biohazard remediation under the dwelling or personal property coverage, but the adjuster will require documentation of the work performed and the disposal method. Our photo record and disposal manifest are built to satisfy exactly that review. Call (629) 213-4606 to walk through your policy.

Who handles the disposal manifest after a trauma cleanup?

We do. Every biohazard job includes a written disposal manifest that documents what was removed, where it was taken, and how it was transported. That record is delivered with the final invoice and is admissible for insurance files.

Reconstruction & Cleanup in Clovis

Reconstruction after water, fire, or mold damage in Clovis works differently than a remodel because the job is scoped against a restoration invoice, not a design wishlist. The written scope we prepare after the mitigation work is complete lists exactly what gets rebuilt, what material goes in, and what each line costs, so the adjuster and the homeowner are looking at the same record. See our Reconstruction & Cleanup process.

Drywall & Flooring Repair

Signs you need it

Open wall cavities after water or mold mitigation, buckled or stained flooring, or missing baseboards indicate that the structural surface needs to be rebuilt before the room is usable.

What it costs in Clovis

Drywall and flooring repair in Clovis typically runs $2,500-$8,000 depending on the affected square footage and the finish level required.

How we do it

We hang, tape, and finish drywall to match the existing texture, then install the flooring and trim with materials that meet the current California building code for this climate zone.

Full-Service Reconstruction

Signs you need it

When mitigation has stripped a room or an entire level to the framing, you need a single scope that carries the project from rough-in to final walkthrough, documented the entire way.

What it costs in Clovis

Full-service reconstruction in Clovis generally runs $10,000-$50,000+ depending on the scale of the affected area and the finish level specified in the written scope.

How we do it

We run the job from the restoration invoice, not a separate remodel quote: one written scope, one schedule, and daily documentation through the final walkthrough and the 365-Day Done Right Promise.

What Reconstruction & Cleanup Costs in Clovis

Do you coordinate with my insurance adjuster on reconstruction?

Yes, directly. The written scope, daily photo record, and daily drying log are delivered to your adjuster in the format they need, and we walk the job with them when a reinspection is required. Call (629) 213-4606 for a written reconstruction scope.

Do I need a separate contractor for reconstruction after restoration?

You can use one, but it creates friction between two separate scopes and two separate invoices. We run reconstruction from the same documentation trail as the mitigation work, which keeps the claim file clean and the rebuild on schedule.

Brands We Service in Clovis

We service all major restoration equipment brands, including our brands page for the full list. Parts for Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry equipment are stocked locally, and the most common parts stay on the truck in Clovis so a failed dehumidifier does not stall a drying job.

Pricing for Damage Restoration in Clovis, CA

Neighborhoods We Serve in Clovis

We regularly work throughout Clovis, with most of our calls coming from the northeast tracts closest to the foothills and the older central neighborhoods where the housing stock carries more water intrusion risk. Dispatch to most Clovis neighborhoods is same-day for water and sewage events.

• Northeast Clovis (Copper, Herndon, Loma Vista corridors)
• Central Clovis (1950s-1970s wood-frame neighborhoods)
• Old Town Clovis
• Clovis East (newer southeast subdivisions)
• Northwest Clovis (Gettysburg and Barstow corridors)

Service Area - Cities Near Clovis

Our Clovis crews also serve the surrounding Central Valley communities, including Fresno, CA, Sanger, CA, Madera, CA, and Selma, CA. Dispatch and scheduling for all these cities is coordinated from our Fresno, Central Valley office, with crews on the ground in Clovis daily.

FAQs About Damage Restoration in Clovis