Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterDamage Restoration in Selma, CA
Mold remediation in Selma typically costs $1,500 to $6,000 depending on the affected square footage and whether crawl spaces or wall cavities are involved. Homes here, many built between the 1940s and 1970s, carry original galvanized plumbing and minimal vapor barriers, which means a small leak becomes a microbial problem faster than in newer construction. If you need damage restoration in Selma, call (629) 213-4606 and you’ll get a written price before any work begins.
Why Selma Homes Are Different
Selma sits in the middle of the San Joaquin Valley’s agricultural irrigation grid, and that changes how restoration work gets done here. Residential parcels on the east side back up to irrigation district laterals, field drains, and levee-fed ditches that fail independently of any municipal stormwater system. A slow seep from a neglected gate valve or a levee berm failure after a heavy Kings River release can saturate sub-slab soils for weeks before a homeowner notices. By the time you see staining on the slab, microbial growth is already established underneath.
The housing stock compounds the problem. Most Selma homes are post-WWII stucco tract houses and modest agricultural worker bungalows with original galvanized supply lines and little to no vapor barrier in the crawl space. Deferred maintenance is common. We routinely find pre-existing moisture damage layered beneath the presenting loss, which is why our scopes name what we found, not just what we plan to fix.
Then there’s Tule fog. From roughly November through February, Selma sits under near-100% relative humidity at ground level for days at a stretch. That fog holds moisture against framing and drywall, and it accelerates mold colonization in wall cavities, crawl spaces, and poorly ventilated attics. Summer brings the opposite problem: 105°F days that bake mold into building materials and cause rapid secondary cracking in repair patches.
One more local factor most out-of-area crews underestimate: soil-disturbing restoration work in Selma carries a documented Valley Fever risk. Fresno County consistently ranks among California’s highest-incidence counties for Coccidioides spores. Dust control and respiratory protocols are not optional here. We run HEPA-filtered air scrubbers during any job that disturbs soil, crawl space debris, or long-settled dust.
Our Main Selma Services
Selma homeowners call us most often about two services: water damage from irrigation lateral failures and storm damage from winter atmospheric rivers. Both have dedicated pages with full pricing and timelines.
Water Damage Restoration in Selma
When an irrigation lateral behind an east-side lot saturates sub-slab soils, water wicks upward through the slab and into flooring, baseboards, and lower wall cavities. What looks like a minor damp spot is often the visible edge of a much larger saturation zone. We map the affected area with moisture meters and thermal imaging, then deploy Dri-Eaz and Phoenix drying systems sized to the actual readings, not a guess. Read the full breakdown here: Water Damage Restoration in Selma.
Storm & Disaster Restoration in Selma
Winter storms push Kings River releases through the district’s levee system, and Selma’s flat terrain means water has nowhere to go except toward foundations. Tarping, board-up, and rapid water extraction have to happen before the fog season sets in and turns standing moisture into mold. We document every step for your insurer. See the full scope here: Storm & Disaster Restoration in Selma.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterMold Remediation in Selma
Mold remediation in Selma means dealing with what Tule fog and deferred maintenance leave behind. In homes built between the 1940s and 1970s, original galvanized plumbing eventually fails behind walls, and with no vapor barrier in the crawl space, the resulting moisture feeds fungal growth that spreads through wall cavities long before you see a single spot of discoloration. Our Mold Remediation work starts with a written scope and a moisture map, so you know exactly what was found and what we’re going to do about it.
Mold Inspection & Testing
Signs you need it
A persistent musty smell in a Selma home that intensifies during fog season, visible staining on baseboards, or a history of plumbing leaks in walls built before 1975.
What it costs in Selma
Mold inspection and testing in Selma typically ranges from $350 to $700, depending on the number of samples and whether lab analysis is required.
How we do it
We use moisture meters and thermal imaging to locate hidden water sources, collect air and surface samples for lab testing, and deliver a written report with findings and a remediation protocol.
Crawl Space Treatment
Signs you need it
Selma homes with bare-soil crawl spaces that trap Tule fog moisture from November through February, or that show visible fungal growth on floor joists and subfloor sheathing.
What it costs in Selma
Crawl space mold treatment in Selma typically runs $1,200 to $4,000, depending on square footage, access clearance, and whether encapsulation is needed.
How we do it
We remove contaminated insulation, treat affected framing and soil with EPA-registered antimicrobials, and install vapor barriers sized to the crawl space’s actual footprint.
What Mold Remediation Costs in Selma
| Item | Typical range in Selma |
|---|---|
| Mold inspection & testing | $350 - $700 |
| Containment & removal (per 100 sq ft affected) | $800 - $2,500 |
| Crawl space treatment | $1,200 - $4,000 |
Will insurance cover mold remediation in Selma?
Coverage depends on the source of the moisture. A sudden pipe failure is often covered; long-term seepage from an irrigation lateral is usually not. Our photo documentation and daily drying logs give your adjuster the evidence they need either way.
How long does mold remediation take in Selma?
Most Selma jobs run two to five days. Fog-season jobs can extend if drying conditions are poor and we have to run desiccant systems longer to hit target moisture readings. Call (629) 213-4606 for a timeline on your specific situation.
Fire & Smoke Damage Restoration in Selma
Fire damage in Selma is often concentrated in older stucco tract homes with original electrical panels and ungrounded wiring. Smoke and soot push into every wall cavity and attic chase, and the same Tule fog that accelerates mold also traps smoke odor against cool surfaces during fire-scene cleanup. Our Fire & Smoke Damage Restoration process starts with a written damage map, then moves to materials-level cleaning and odor neutralization.
Smoke & Soot Removal
Signs you need it
Visible soot streaking on walls and ceilings, a persistent smoke smell that worsens with humidity, or yellowing of paint and plastics in the days after a fire.
What it costs in Selma
Smoke and soot removal in Selma typically ranges from $2,500 to $8,000, depending on affected square footage and the type of soot involved.
How we do it
We dry-sponge and HEPA-vacuum all surfaces, clean contents by material type, and run hydroxyl or ozone systems to neutralize odor at the molecular level.
Odor Removal & Deodorization
Signs you need it
A smoke smell that returns whenever fog season raises indoor humidity, or odors that concentrate in closets, attics, and wall cavities months after the fire.
What it costs in Selma
Odor removal and deodorization in Selma typically runs $1,500 to $5,000, with the range driven by how deeply smoke penetrated insulation and framing.
How we do it
We identify odor reservoirs with a thermal camera, remove or seal the source materials, and run vapor-phase or ozone treatments sized to the space.
What Fire & Smoke Damage Restoration Costs in Selma
| Item | Typical range in Selma |
|---|---|
| Smoke & soot removal | $2,500 - $8,000 |
| Odor removal & deodorization | $1,500 - $5,000 |
| Emergency board-up & tarping | $800 - $2,500 |
How fast can someone get to a Selma fire scene?
We dispatch to Selma the same day you call. Board-up and tarping happen first to limit further damage, and the written scope is delivered before any cleanup begins. Call (629) 213-4606.
Do I need to replace drywall after a small fire in Selma?
Not always. If drywall is structurally intact with surface soot only, cleaning and sealing often suffices. If smoke reached the framing behind it, replacement is usually the cheaper long-term fix than repeated odor treatments.
Sewage Cleanup in Selma
Sewage backups in Selma come from two sources: old cast-iron and galvanized drain lines in 1940s-1970s homes, and district irrigation water infiltrating aging sewer laterals after heavy Kings River releases. Sewage cleanup is a Category 3 water event; it requires full containment, proper PPE, and materials disposal, not just a mop and a fan. Our Sewage Cleanup protocol follows IICRC standards and delivers a written scope before the extraction begins.
Sewage Backup Cleanup
Signs you need it
Water backing up from floor drains or toilets in a Selma home, gurgling sounds from drains during fog-season rains, or a sewage smell coming from wall cavities near old plumbing stacks.
What it costs in Selma
Sewage backup cleanup in Selma typically ranges from $2,000 to $7,000, depending on the affected square footage and whether drywall or flooring must be removed.
How we do it
We contain the affected zone, extract with truck-mounted or portable equipment, cut and dispose of contaminated materials, and sanitize with EPA-registered disinfectants to IICRC standards.
Toilet Overflow Cleanup
Signs you need it
A toilet overflow that has soaked into flooring, subfloor, or wall cavities in a Selma home, especially in bathrooms built before modern waterproofing standards.
What it costs in Selma
Toilet overflow cleanup in Selma typically runs $800 to $2,500 when caught early, rising toward $5,000 if water reached subfloor or wall framing.
How we do it
We extract standing water, remove contaminated porous materials, dry the space to target moisture readings, and document every reading in a daily drying log.
What Sewage Cleanup Costs in Selma
| Item | Typical range in Selma |
|---|---|
| Toilet overflow cleanup | $800 - $2,500 |
| Sewage backup cleanup | $2,000 - $7,000 |
| Sanitization & disinfection | $500 - $2,000 |
Will insurance cover sewage cleanup in Selma?
If the backup was sudden and the cause is a covered peril, most policies respond. We photograph everything and provide a drying log and written scope so your adjuster has what they need. Call (629) 213-4606 with your policy details.
Can I clean up sewage myself in Selma?
No. Sewage carries pathogens including E. coli, hepatitis A, and parasites. It requires full PPE, containment, and proper disposal. This is not a job for gloves and bleach.
Biohazard & Crime Scene Cleanup in Selma
Biohazard cleanup in Selma is not a janitorial task; it means handling blood, bodily fluids, or unattended-death residue in homes that are often close-quartered older bungalows where contamination spreads through shared ventilation. We work discreetly, with unmarked vehicles, and deliver a written scope before any cleanup begins. Our Biohazard & Crime Scene Cleanup team is background-checked and trained to IICRC and OSHA standards for bloodborne pathogens.
Blood & Bodily Fluid Cleanup
Signs you need it
Any blood or bodily fluid release in a Selma home, whether from an accident, injury, or medical event, that has soaked into porous materials or pooled on hard surfaces.
What it costs in Selma
Blood and bodily fluid cleanup in Selma typically ranges from $1,000 to $5,000, depending on the affected square footage and whether subfloor or wall framing was contaminated.
How we do it
We isolate the area, remove and dispose of contaminated porous materials as regulated medical waste, sanitize with hospital-grade disinfectants, and verify clearance with ATP testing.
Trauma & Unattended Death Cleanup
Signs you need it
An unattended death in a Selma residence, or a traumatic injury, where decomposition fluids have saturated flooring, drywall, or furnishings.
What it costs in Selma
Trauma and unattended death cleanup in Selma typically runs $2,500 to $12,000, driven by the affected square footage and the depth of structural penetration.
How we do it
We remove all affected materials, treat the framing with odor-neutralizing antimicrobials, coordinate with your insurer, and provide full photo documentation of every step.
What Biohazard & Crime Scene Cleanup Costs in Selma
| Item | Typical range in Selma |
|---|---|
| Blood & bodily fluid cleanup | $1,000 - $5,000 |
| Trauma & unattended death cleanup | $2,500 - $12,000 |
| Infectious disease disinfection | $1,200 - $4,500 |
Who deals with my insurance on a biohazard claim in Selma?
We coordinate directly with your adjuster. The photo record we deliver on every visit, plus the written scope and disposal manifests, are the documentation that gets biohazard claims paid. Call (629) 213-4606.
Do you work with law enforcement or coroner timelines in Selma?
Yes. We do not begin until the scene has been released by the relevant authorities. Once released, we can typically be on site within hours to start containment and removal.
Reconstruction & Cleanup in Selma
Reconstruction in Selma means rebuilding after water, fire, or mold remediation in homes where original materials are often fifty to eighty years old. That age brings complications: plaster on rock lath, galvanized supply piping, and wiring that may not meet current code. Our Reconstruction & Cleanup team quotes the rebuild as a written scope, the same as the mitigation, so you know the full cost before the first sheet of drywall is hung.
Drywall & Flooring Repair
Signs you need it
Cut-away drywall from mold or sewage remediation that needs replacing, or flooring that buckled after water damage in a Selma home and cannot be dried flat.
What it costs in Selma
Drywall and flooring repair in Selma typically ranges from $2,000 to $12,000, depending on the affected square footage and chosen materials.
How we do it
We remove damaged materials to the scoped boundaries, install new drywall and flooring matched to the existing profile, and document the repair with photos at each stage.
Full-Service Reconstruction
Signs you need it
Extensive damage in a Selma home after a fire, sewage loss, or long-term leak where structural framing, insulation, or subfloor must be replaced before rebuilding can begin.
What it costs in Selma
Full-service reconstruction in Selma typically runs $15,000 to $80,000, scaled by the affected square footage and the level of finish required.
How we do it
We scope the entire rebuild in writing before work starts, pull permits where required, and schedule trades so the project moves from framing to finish without gaps.
What Reconstruction & Cleanup Costs in Selma
| Item | Typical range in Selma |
|---|---|
| Drywall & flooring repair | $2,000 - $12,000 |
| Full-service reconstruction | $15,000 - $80,000 |
| Post-construction cleanup | $400 - $2,000 |
Do I need a permit for reconstruction in Selma?
Most structural work, including wall removal, plumbing relocation, and electrical changes, requires a Selma building permit. We pull permits as part of the written scope. Cosmetic repairs like paint and flooring usually do not.
How long does reconstruction take in Selma?
Most Selma rebuilds run two to eight weeks after demolition, depending on the scope and material lead times. The written scope includes a schedule, so you know when each stage finishes.
Brands We Service in Selma
We service and deploy equipment from Dri-Eaz, Phoenix, XPOWER, and Injectidry across every Selma job. Common drying systems and parts are stocked in our Central Valley office, so there’s no multi-day wait for a replacement part when a drying system needs service mid-job. See our brands for the full list.
Pricing for Damage Restoration in Selma, CA
| Service | Typical range in Selma |
|---|---|
| Mold inspection & testing | $350 - $700 |
| Crawl space treatment | $1,200 - $4,000 |
| Smoke & soot removal | $2,500 - $8,000 |
| Odor removal & deodorization | $1,500 - $5,000 |
| Toilet overflow cleanup | $800 - $2,500 |
| Sewage backup cleanup | $2,000 - $7,000 |
| Blood & bodily fluid cleanup | $1,000 - $5,000 |
| Trauma & unattended death cleanup | $2,500 - $12,000 |
| Drywall & flooring repair | $2,000 - $12,000 |
| Full-service reconstruction | $15,000 - $80,000 |
Prices in Selma run higher when Tule fog slows drying, when crawl spaces require encapsulation, or when pre-existing damage from deferred maintenance adds a second layer to the job. What pushes cost down is early detection. Every DryMark estimate is a written price delivered before work starts, under Haven Standard, Clause 1.
Neighborhoods We Serve in Selma
We serve every neighborhood in Selma, from the older bungalow blocks near downtown to the east-side subdivisions that back onto irrigation laterals and the newer tract developments on the city’s edges.
- Downtown Selma historic district
- East side near the irrigation laterals
- West Selma residential tracts
- The subdivisions near Selma High School
- Rural parcels along the Selma periphery
Our standard response time to most Selma addresses is 30 to 60 minutes for water and sewage emergencies. Mold and reconstruction jobs are scheduled by written scope.
Service Area - Cities Near Selma
DryMark also serves neighboring Central Valley communities. If you’re in Reedley, CA, Sanger, CA, Dinuba, CA, or Hanford, CA, the same written-price-before-work guarantee applies. Each city gets a page with local pricing and conditions.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Damage Restoration in Selma
For water and sewage emergencies, we typically arrive at most Selma addresses within 30 to 60 minutes. Mold, fire, and biohazard jobs are scheduled by the written scope, usually within one to two days of your call. Dispatch is coordinated from our Fresno, Central Valley office.
No. California law gives you the right to choose your own restoration contractor. We work with every major insurer, document to IICRC and RIA standards, and coordinate directly with your adjuster so your claim stays on track.
Bring the written estimate to us. We’ll review it at no charge and tell you honestly whether their scope covers the same work. A lower line-item price often means a smaller scope, and a smaller scope is how restoration bills grow after the crew is inside.
If you’re dealing with mold, fire, sewage, biohazard, or reconstruction in Selma, call (629) 213-4606. A live person answers, the estimate is free, and the written price is in your hand before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Burst supply line upstairs. They had equipment in the house within a few hours and told me honestly which flooring could be saved and which could not."
- Jarrod P."They photographed behind the baseboards before removing anything. That documentation is the only reason the claim covered the wall cavity."
- Noreen S."Storm took part of the roof. They tarped it the same evening and the written scope came through the next morning."
- Emmett L.