Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Damage Restoration in Wright, FL
Mold remediation in Wright usually costs between $1,800 and $6,500 for a full residential job, and the work typically runs two to five days depending on how far moisture has wicked through slab-on-grade partition walls. Fire and smoke restoration, sewage cleanup, biohazard work, and reconstruction each carry their own pricing and timelines, all detailed below. If you’re standing in a wet or smoke-damaged home in Wright right now, call (629) 213-4606 and a live person will answer, 24 hours a day.
Why Wright Homes Are Different
Wright is a working-class pocket between Fort Walton Beach and Mary Esther where most of the housing stock dates to the 1960s through 1980s. Those modest concrete-block ranch and split-level homes sit on slab foundations with very little elevation above grade, and the local water table is high enough that crawlspaces are almost nonexistent. When water intrudes, it doesn’t drain down and away. It moves horizontally through the slab, under base plates, and into interior partition walls, where it stays for weeks unless someone measures and documents it properly.
The homes off Beal Parkway still hold a lot of their original cast-iron drain lines and flat-tape wiring. Cast iron corrodes from the inside after fifty years, and when it finally cracks, sewage backs up into a slab foundation rather than a crawlspace, which means the contamination travels into drywall and trim instead of pooling somewhere visible. In the summer, the panhandle’s high humidity means drying must be aggressive from the first day. A Dri-Eaz dehumidifier pulling 70 pints a day is doing a different job in Wright’s July air than it is in a drier inland market. If the drying plan isn’t built around vapor pressure differential, the water just stays behind the drywall and mold follows in three to six weeks.
Our Main Wright Services
Homeowners in Wright call us most often about two things: water damage from storms, failed washer lines, and old cast-iron plumbing, and the storm damage that follows every significant hurricane season. Both have dedicated Wright pages.
Water Damage Restoration in Wright
When a supply line fails or a panhandle downpour pushes water under a door, the water in a Wright slab home doesn’t pool. It spreads sideways through interior walls. The local pros start with room-by-room moisture readings on every affected wall, then build a drying plan that accounts for Wright’s high ambient humidity and slab-on-grade construction. We document every reading, every day. Water Damage Restoration in Wright covers the full process, from extraction through structural drying, with local pricing.

Storm & Disaster Restoration in Wright
Wright sits directly in the panhandle hurricane zone, and the homes built here in the 1970s and 1980s were never designed for modern stormwater volume. After a Hurricane Sally-style surge or a heavy June squall, water finds the low spots and stays there. Storm & Disaster Restoration in Wright details how we handle wind-driven rain, roof leaks, and surge flooding, including tarping, board-up, and full structural drying with documented psychrometric data throughout.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterMold Remediation in Wright


Mold remediation in Wright is usually a two-part problem: the visible colony and the hidden moisture that feeds it. In slab-on-grade homes with high local humidity, mold regularly grows inside wall cavities where nobody sees it until a musty odor becomes constant or a family member’s allergies worsen indoors. That’s why our Wright jobs start with an inspection that measures moisture in wall cavities, then moves to physical removal and drying, not just surface treatment. See our Mold Remediation hub for the full scope of our process.
Mold Inspection & Testing
Signs you need it
A persistent musty smell in one room, visible staining on baseboards or ceiling corners, or worsening indoor allergy symptoms are the three most common triggers in Wright homes.
What it costs in Wright
A professional mold inspection with moisture mapping and surface or air sampling in Wright runs $300 to $600, depending on square footage and how many rooms are affected.
How we do it
We walk the home with a moisture meter and infrared camera, map every reading, and take samples where moisture is elevated, then give you a written scope of what needs removal and drying before any work starts.
Mold Removal
Signs you need it
You can see dark patches on drywall, grout, or trim, or an inspector has confirmed elevated mold spore counts inside the home.
What it costs in Wright
Full mold removal in a typical 1,200-square-foot Wright ranch runs $1,800 to $6,000, with small containment jobs starting around $900 and whole-home jobs reaching $12,000 when ductwork and contents are involved.
How we do it
We seal the work area with negative air pressure, physically remove affected drywall and insulation, HEPA-vacuum surfaces, and run drying equipment until moisture readings in the wall cavities match the home’s baseline.
Black Mold Remediation
Signs you need it
You see black or dark green patches that appear slimy, often on drywall that’s been wet for more than 48 hours.
What it costs in Wright
Black mold remediation in Wright homes generally runs $2,500 to $7,500 because it requires full containment, PPE, and longer equipment runtimes than surface mold cleanup.
How we do it
We treat it like any mold removal, but with stricter containment: sealed barriers, negative air machines, full PPE for technicians, and documented clearance testing after the job.
What Mold Remediation Costs in Wright
| Item | Typical range in Wright |
|---|---|
| Mold inspection & testing | $300 – $600 |
| Mold removal (typical 1,200 sq ft home) | $1,800 – $6,000 |
| Black mold remediation | $2,500 – $7,500 |
Will my homeowner’s insurance cover mold remediation in Wright?
Most policies cover mold remediation only when it results from a covered water event, like a burst pipe or storm intrusion. Documentation is what makes the difference: our daily drying logs and photo records show your insurer the mold was addressed as part of the covered loss, not as a maintenance issue. Call (629) 213-4606 and we’ll review your situation with you.
How long does mold removal take in a Wright slab home?
Most mold removal jobs in Wright run two to five days. Dry-out time is what stretches the schedule, because slab-on-grade homes hold moisture in partition walls longer than raised homes, and Wright’s humidity slows evaporation. We leave equipment running until readings stabilize, not on a fixed clock.
Fire & Smoke Damage Restoration in Wright


Fire and smoke damage restoration in Wright carries a particular challenge: the same slab-and-block construction that holds water also traps smoke. Soot works into the pores of concrete block and into every inch of the flat-tape wiring that runs through older Wright homes, so a kitchen fire that looks contained at first can leave a smoke odor that returns for months if the cleanup skips surfaces. We approach every job assuming the smoke traveled farther than the flames. See Fire & Smoke Damage Restoration for the full process.
Smoke & Soot Removal
Signs you need it
Black or gray residue on walls and ceilings, a sharp smoke odor that lingers after a fire, or yellowing on painted surfaces within days of a kitchen fire.
What it costs in Wright
Smoke and soot cleanup in Wright runs $800 to $3,500 for a typical single-room kitchen fire, and up to $15,000 for whole-home smoke damage.
How we do it
We HEPA-vacuum every surface, dry-sponge walls and ceilings, then clean with chemical sponges before deodorizing with thermal fogging or ozone so the odor doesn’t return.
Odor Removal & Deodorization
Signs you need it
A burnt or acrid smell persists in the home weeks after the fire, or the smell returns whenever humidity rises.
What it costs in Wright
Standalone odor removal in Wright typically runs $500 to $2,000, depending on square footage and whether contents need treatment.
How we do it
We identify the smoke type, run thermal fogging or hydroxyl generators through the affected area, and document odor neutralization with before-and-after air sampling.
What Fire & Smoke Damage Restoration Costs in Wright
| Item | Typical range in Wright |
|---|---|
| Smoke & soot removal (single room) | $800 – $3,500 |
| Whole-home smoke cleanup | $5,000 – $15,000 |
| Odor removal & deodorization | $500 – $2,000 |
Does smoke damage in Wright homes require full drywall replacement?
Not usually. In most Wright slab homes, soot can be cleaned from painted drywall with the right chemical sponges and deodorization. But when smoke has been driven deep into unpainted surfaces, like inside closets or behind cabinets, replacement is the only way to stop the odor.
How fast can you respond to a fire damage call in Wright?
Live dispatch answers 24 hours a day, and a crew can be on site in Wright the same day. Board-up and tarping happen first, then we photograph everything before cleanup begins so your insurer sees exactly what was damaged. Call (629) 213-4606.
Sewage Cleanup in Wright


Sewage cleanup in Wright is a more serious job than in most markets because of the cast-iron drain lines still running through the area’s 1960s-to-1980s block homes. When those lines crack, the backup doesn’t drain into a crawlspace. It pushes up through the slab and into baseboards, drywall, and finished flooring. Every sewage job is a Category 3 water event requiring full containment, removal of contaminated materials, and disinfection. Sewage Cleanup covers the full process.
Sewage Backup Cleanup
Signs you need it
Multiple drains backing up at once, sewage smell coming from floor drains, or visible black water pooling around a toilet or shower base.
What it costs in Wright
Sewage backup cleanup in a Wright home runs $2,500 to $9,500, with the higher end reflecting jobs where contaminated water spread through multiple rooms.
How we do it
We extract the standing waste, remove affected drywall and flooring, pressure-wash and disinfect the exposed slab, and run drying equipment until the concrete reads dry throughout.
Sanitization & Disinfection
Signs you need it
Any surface that came into contact with sewage, including walls, studs, concrete, and personal items, needs professional disinfection after the waste is removed.
What it costs in Wright
Standalone sanitization and disinfection in Wright runs $500 to $1,800, and is often included in the full sewage cleanup scope.
How we do it
We apply an EPA-registered disinfectant to every affected surface, then document the treatment with photos and a written disinfection log your insurer can review.
What Sewage Cleanup Costs in Wright
| Item | Typical range in Wright |
|---|---|
| Sewage backup cleanup | $2,500 – $9,500 |
| Toilet overflow cleanup | $800 – $2,500 |
| Sanitization & disinfection | $500 – $1,800 |
Is sewage cleanup in Wright covered by homeowners insurance?
Usually, yes, if the backup was sudden and accidental, like a cast-iron line failure or a clogged drain that overflowed. The single most important thing is to document what was wet before cleanup starts. Our photo record and written scope are built for exactly that review. Call (629) 213-4606 with questions.
Can I stay in my Wright home during sewage cleanup?
No. Sewage contains pathogens that become airborne during extraction and removal. We seal the affected area with containment barriers and run negative air pressure. Occupants and pets should stay out of the contained zone until disinfection is complete and the area passes a final inspection.
Biohazard & Crime Scene Cleanup in Wright


Biohazard and crime scene cleanup in Wright is work most people never expect to need, and when they do, they’re often handling it alone, without knowing what’s safe to touch. Blood, bodily fluids, and decomposition fluids carry bloodborne pathogens that require professional handling, proper containment, and lawful disposal. We respond the same day, and we photograph and document everything before, during, and after the cleanup. Biohazard & Crime Scene Cleanup outlines the full scope.
Trauma & Unattended Death Cleanup
Signs you need it
A person has passed away alone and was not found for a period of time, leaving biological fluid contamination on floors, furniture, or walls.
What it costs in Wright
Trauma and unattended death cleanup in Wright typically costs $2,500 to $7,000 depending on how long the scene went undiscovered and how many surfaces were affected.
How we do it
We remove all contaminated materials, clean and disinfect the affected surfaces, and complete odor neutralization so the home can be safely reoccupied.
Blood & Bodily Fluid Cleanup
Signs you need it
Any injury, accident, or death has left blood or bodily fluids on flooring, walls, or furniture inside a Wright home or vehicle.
What it costs in Wright
Blood and bodily fluid cleanup in Wright runs $1,200 to $5,000, with pricing driven by square footage and whether porous materials like carpet or drywall must be removed.
How we do it
We remove affected porous materials, treat non-porous surfaces with hospital-grade disinfectants, and then test to confirm the area meets clearance standards.
What Biohazard & Crime Scene Cleanup Costs in Wright
| Item | Typical range in Wright |
|---|---|
| Blood & bodily fluid cleanup | $1,200 – $5,000 |
| Trauma & unattended death cleanup | $2,500 – $7,000 |
| Hoarding cleanup (light) | $1,500 – $8,000 |
Will my insurance cover biohazard cleanup in Wright?
Homeowners insurance often covers crime scene and trauma cleanup under the dwelling or personal property provisions, depending on the policy. We photograph everything, document what was removed, and work directly with your adjuster so the claim moves without guesswork. Call (629) 213-4606 for a straight answer.
Who handles the disposal of biohazard waste from Wright homes?
We do, under regulated medical waste protocols. Biohazard materials are sealed in approved containers, labeled, and transported to a licensed disposal facility. You receive a manifest showing everything was handled lawfully, which your insurer may ask for.
Reconstruction & Cleanup in Wright


Reconstruction in Wright after a fire, flood, or sewage loss is different from a standard remodel because the work has to answer to an insurance file, not just a personal preference. In older Wright block homes, that often means opening walls to address hidden moisture, matching 1970s or 1980s finishes, and working around the original slab. Every job starts with a written scope and a line-item price before anyone swings a hammer. Reconstruction & Cleanup details the full range.
Drywall & Flooring Repair
Signs you need it
Flood cuts, sewage removal, or fire damage have left drywall, subfloor, or finished flooring missing or structurally unsound.
What it costs in Wright
Drywall and flooring repair after a loss in Wright runs $2,000 to $12,000, depending on how many rooms need work and whether the slab itself needs preparation.
How we do it
We replace damaged materials, match existing textures and finishes, and document every step with photos and a written change order log.
Full-Service Reconstruction
Signs you need it
An entire room or multiple rooms were gutted during mitigation, and the home needs framing, drywall, paint, trim, and flooring rebuilt from the studs and slab up.
What it costs in Wright
Full-room reconstruction in Wright typically runs $8,000 to $40,000, with whole-home rebuilds priced by a written, itemized contract rather than a square-foot guess.
How we do it
We scope the entire job in writing, price every line item, sequence the work from framing through finish, and run weekly documented progress reports.
What Reconstruction & Cleanup Costs in Wright
| Item | Typical range in Wright |
|---|---|
| Drywall & flooring repair | $2,000 – $12,000 |
| Full-service reconstruction (single room) | $8,000 – $22,000 |
| Post-construction cleanup | $300 – $1,200 |
Does Wright require permits for reconstruction after a loss?
Yes, for structural work, electrical, plumbing, and often for HVAC changes. Okaloosa County enforcement covers Wright, and we handle the permit application and inspections as part of our reconstruction scope so the work is documented and code-compliant when the claim closes.
Do you work directly with my insurance adjuster on reconstruction?
Yes. We provide the adjuster a written line-item estimate, documentation of the loss, and progress photos with a daily log. We never start reconstruction until you and your insurer have approved the written scope, so there are no surprise change orders mid-project. Call (629) 213-4606 to talk it through.
Brands We Service in Wright

We restore homes built with mainstream national materials, and we stock and source parts for the brands found in Wright’s 1960s-to-1980s housing stock: drywall and texture products, standard slab flooring systems, and the common cabinet, trim, and fixture lines available locally. Turnaround on parts runs same-day to three days depending on supplier stock. See our brands for the full list.
Pricing for Damage Restoration in Wright, FL
| Service | Typical range in Wright |
|---|---|
| Mold inspection & testing | $300 – $600 |
| Mold removal | $1,800 – $6,000 |
| Black mold remediation | $2,500 – $7,500 |
| Smoke & soot removal | $800 – $3,500 |
| Odor removal & deodorization | $500 – $2,000 |
| Sewage backup cleanup | $2,500 – $9,500 |
| Blood & bodily fluid cleanup | $1,200 – $5,000 |
| Trauma / unattended death cleanup | $2,500 – $7,000 |
| Drywall & flooring repair | $2,000 – $12,000 |
| Full-service reconstruction | $8,000 – $40,000 |
In Wright, pricing moves on three things: how far moisture has traveled through a slab-on-grade foundation, whether cast-iron drain lines or flat-tape wiring are involved, and how long the water sat before anyone found it. Every job we quote includes a written price before work starts, under Haven Standard, Clause 1, so there’s no surprise figure when the crew walks in.
Neighborhoods We Serve in Wright

We respond across the full 32547 ZIP code in Wright, including the older streets off Beal Parkway where jalousie windows and original block construction are the norm, and the mixed residential pockets near Hurlburt Field’s western boundary. Response to any Wright address runs same-day for mitigation calls.
- Beal Parkway corridor
- Hurlburt Field western boundary area
- Wright residential core near Lovejoy Road
- North Wright subdivisions
- South Wright toward Mary Esther line
Service Area – Cities Near Wright
We also handle restoration work in the surrounding area. The local pros travel to Fort Walton Beach, FL, Shalimar, FL, Mary Esther, FL, and Valparaiso, FL on the same dispatch schedule. If your home is in one of those communities or on the edge of Wright itself, call and we’ll route the nearest crew.
Serving Wright, FL - Our Local Coverage Area

We’re serving the Wright area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Damage Restoration in Wright
For water, sewage, fire, and biohazard calls, a crew is dispatched the same day. A live person answers at (629) 213-4606 24 hours a day, and we route crews from the area directly to your Wright address. You don’t wait on a callback when water is still moving through the slab.
Remediation itself doesn’t usually require a permit, but any reconstruction after the cleanup, like drywall replacement or electrical work, does. Okaloosa County governs Wright, and we pull permits on the reconstruction side, not the emergency mitigation side.
Every job includes a written scope with line-item pricing, a room-by-room photo record, daily drying logs with moisture readings, and a signed Done Right Promise under The Haven Standard. That file is built so your adjuster can approve it without a fight.
What happens when you call
- 1A real person answersNo phone trees - talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wright Customers Say
"Daily moisture readings, written down, room by room. When the adjuster questioned the drying time they sent the log and the conversation ended."
- Constance E."Professional through a genuinely awful week. Explained each stage before it happened."
- Kalila R."Burst supply line upstairs. They had equipment in the house within a few hours and told me honestly which flooring could be saved and which could not."
- Jarrod P.






Before
After
Before
After