Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Fast, Reliable Water Damage Restoration Across New York City
A burst pipe in a New York City high-rise rarely stays one apartment’s problem. Water follows gravity through concrete slabs, lathe-and-plaster chases, and stacked unit cavities until someone stops it. Most water damage restoration jobs in New York City involve multiple units, a building management team, and at least two insurance policies before the first air mover gets plugged in. Our crews coordinate all of it: extraction, structural drying, board communication, and adjuster documentation, with a written price before any work begins. If water is moving through your building right now, call (629) 213-4606. A live person answers, 24 hours a day, seven days a week.
Why DryMark Restoration Is New York City’s Preferred Water Damage Restoration Company
We built DryMark around a gap Alicia Brennan saw during her years as a claims adjuster: homeowners and shareholders lost claims not because the damage wasn’t real, but because the documentation didn’t hold up. So every job we run in New York City gets a photo record on every visit, daily moisture readings mapped room by room, and a written scope of work delivered before a single piece of equipment enters the building. Haven Standard, Clause 1: written price before work begins. Always.
New York City’s housing stock doesn’t forgive shortcuts. Pre-war buildings on the Upper West Side have cast iron risers that crack and dump water into the wall cavities of eight units at once. Post-war towers in Midtown hide plumbing chases behind concrete fireproofing that wicks moisture laterally. We know where water travels in these structures because we’ve dried them. Our technicians are background-checked, uniformed, and licensed, and their license numbers appear on the paperwork you get. The drying systems we deploy, Dri-Eaz and Phoenix LGR dehumidifiers, are documented to IICRC, RIA, and IFA standards. That documentation is what turns a restoration invoice into a payable claim.
Our Water Damage Restoration Services in New York City

Emergency Water Extraction in New York City
In a stacked co-op or condo, extraction time matters more than in a suburban basement. Water that sits for six hours in a plaster wall cavity starts wicking into surrounding units and common areas. Our extraction crews arrive with truck-mounted and portable units sized for high-rise access, not suburban driveways. We coordinate freight elevator scheduling with building management before we arrive, so a burst riser on a 15th-floor line in Murray Hill doesn’t wait while the crew argues with a freight operator. Typical water extraction in New York City runs $450 to $900 for a single-unit loss, with multi-unit cascades priced by affected square footage. Call (629) 213-4606 for a written price before anything starts.
Structural Drying & Dehumidification in New York City
Drying a pre-war apartment means managing vapor pressure differential inside walls that were built before modern air sealing existed. We use psychrometric data readings (temperature, relative humidity, and the vapor pressure between wet and dry materials) to calculate how many LGR dehumidifiers and air movers each cavity needs. Tertiary drying, the final phase where hidden moisture in plaster and flooring is pulled to the surface, often takes five to seven days in New York City’s masonry buildings because the materials hold water differently than drywall. Structural drying in NYC typically runs $1,200 to $2,400 per affected room, depending on whether lath and plaster requires chamber or injection drying.
Burst Pipe Restoration in New York City
January and February are the worst months for pipe bursts in this city. Steam-heat risers in older buildings leave sections of supply plumbing uninsulated in exterior walls, and a hard freeze does the rest. A burst supply line in a Chelsea pre-war building can put 40 gallons of water per minute into a kitchen cavity. We handle the full restoration chain: locating the rupture, extracting standing water, mapping moisture migration through wall cavities, and drying to IICRC standard. Burst pipe restoration in New York City typically starts at $850 for localized single-unit damage and runs higher when multiple stacked units are involved.
Flood Cleanup in New York City
Coastal flood zones in the Rockaways, Lower Manhattan, and the south shore of Staten Island carry a permanent risk that inland ZIP codes don’t. Nor’easters push surge water into ground-level units and basement mechanical rooms, and that water carries sewage, fuel oil, and salt. We classify the floodwater category before scoping, then document what was contaminated and what can be dried. Flood cleanup in New York City’s flood-zone neighborhoods typically runs $2,500 to $7,500 depending on standing water depth and contamination level.
Before
AfterTrusted Brands We Service in New York City
The equipment we run matters because building occupants ask about it. We deploy Dri-Eaz and Phoenix dehumidifiers, and for the tightest pre-war basement and mechanical room clearances we use Injectidry injection drying systems that get dry air into wall and floor cavities without demoing plaster. Every piece of equipment is documented in the daily drying log we hand you, showing what was placed where and what moisture readings it produced. That log is the difference between an insurer processing your claim in two weeks and questioning it for two months.
Common Water Damage Restoration Problems We See in New York City Homes

- Multi-unit cascades from single pipe failures. A cracked cast iron riser on the sixth floor of a Yorkville pre-war puts water through units five through three before building staff even locates the shut-off valve. Each affected apartment gets its own drying plan and documentation set.
- Co-op proprietary lease boundary disputes. New York City co-op law splits responsibility for water damage between building systems (“within the walls”) and apartment interiors (“from the walls out”). We pull the proprietary lease before cutting anything, so the board and the shareholder’s insurer both see exactly whose scope is whose.
- Asbestos-containing plaster and mastic in pre-war buildings. Buildings constructed before 1980 frequently have asbestos in plaster, pipe insulation, and floor tile mastic. New York City regulations require abatement protocols before restoration work in affected cavities. We coordinate the abatement contractor and sequence our work around it.
- Tight clearances in pre-war basements and mechanical rooms. Townhouse basement stairwells and high-rise elevator shaft access doors were not built for modern drying equipment. We select equipment sized for the access, not for the convenience of the crew.
Pricing for Water Damage Restoration in New York City, NY
We Also Serve Cities Near New York City

We handle water damage restoration in Brooklyn, Queens, Manhattan, and The Bronx, with the same documentation-first approach we bring to every job in New York City. If you’re in a nearby borough and water is moving, call (629) 213-4606. We’ll give you a straight answer about response time and the first extraction steps before you hang up.
Serving New York City, NY - Our Local Coverage Area
We’re based in the New York City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Water Damage Restoration in New York City

How fast will my New York City restoration crew begin water extraction in a high-rise co-op after a pipe burst?
We dispatch to most New York City co-op and condo buildings within 60 to 90 minutes of your call, and extraction begins as soon as the building’s freight elevator and water shut-off access are confirmed. A live person answers at (629) 213-4606 around the clock, and we coordinate building management on our way to the site so the crew isn’t standing in a lobby waiting for access. For a burst riser affecting multiple stacked units, expect extraction to begin within two to three hours of the first call while simultaneous pump-down and containment setup proceeds floor by floor.
Does your crew understand the ‘within-the-walls’ versus ‘from-the-walls-out’ co-op insurance boundary in New York City?
Yes. We pull the building’s proprietary lease before we cut into any wall cavity. In a standard New York City co-op, the corporation is responsible for building systems within the walls (risers, branch lines, structural elements), while the shareholder’s policy covers everything from the walls out (flooring, finishes, cabinets, fixtures). We map that boundary in the written scope before work starts, so the board, your insurer, and our crew all work from the same document. No hidden demo, no board liability disputes mid-mitigation.
How do you handle asbestos-containing plaster in pre-war New York City apartments during a water damage restoration?
In buildings constructed before 1980, we assume plaster, pipe insulation, and floor tile mastic may contain asbestos until testing says otherwise. We don’t cut, sand, or demo those materials ourselves. We coordinate a licensed asbestos abatement contractor to handle any removal or disturbance, and we sequence our drying work around their containment schedule. The documentation you receive includes the abatement record, which your insurer and the building’s board will both want.
What air mover and dehumidifier strategy do you use for tight pre-war basement mechanical rooms with low clearances?
For tight pre-war basement stairwells and mechanical rooms where standard centrifugal air movers won’t fit through the door, we use low-profile axial air movers and compact LGR dehumidifiers, plus Injectidry injection drying systems for wall and floor cavities we can’t open. The drying goal is the same as a wide-open suburban basement: reach IICRC standard moisture content in every affected material. We just select the equipment that physically fits the access, rather than pretending the access doesn’t exist.
How does your crew coordinate with NYC building management during a multi-unit water damage cascade?
We coordinate with building management before a burst riser or supply line ever creates a cascade that can’t be controlled. That means freight elevator scheduling, water shut-off location, access to locked mechanical rooms, and notification of every affected unit owner before we set foot in their apartment. In a single stacked-unit cascade affecting five to fifteen units, each apartment gets its own drying plan, moisture log, and photo record. The building’s master policy, each shareholder’s individual policy, and the board’s liability carrier all receive the same documentation package. Call (629) 213-4606 and we’ll start the coordination on the first call, while the water is still moving.
Call DryMark Restoration for Water Damage Restoration in New York City
If water is moving through your New York City apartment, co-op, or building right now, call (629) 213-4606. A live person answers. We’ll tell you what to do in the next ten minutes, whether that means shutting a valve, calling building management, or starting extraction immediately. Every job gets a written price before work begins, a documented photo record on every visit, and the 365-Day Done Right Promise in writing, signed under The Haven Standard. If it’s not done right, we make it right. Not a marketing line. A written warranty on every job.
Written by the team at DryMark Restoration, with Alicia Brennan, Owner, who founded the company in 2011 around the documentation gap that costs homeowners their claims. Serving New York City with written scopes, daily drying logs, and photo records on every visit.






Before
After
Before
After