Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Water Damage Restoration Across Arlington
Water damage restoration in Arlington runs $1,800 to $6,500 for a typical single-room event, and most jobs of that size are dried and documented within 3 to 5 days. If you’re standing in water right now, call (629) 213-4606. A live person answers around the clock, and we dispatch crews from our Dallas-Fort Worth office to Arlington neighborhoods every single day.
Arlington homes carry a specific set of risks that neighboring cities don’t face at the same scale. The housing stock is older, the roofs have been beaten by decades of Tarrant County hail, and the clay under the slabs moves with every wet-dry cycle. When water shows up inside an Arlington house, it rarely comes from one direction. We scope for that from the first hour.
We document every moisture reading, every drying log entry, and every photo record. You get a written price before any work begins. No exceptions.
Why DryMark Restoration Is Arlington’s Preferred Water Damage Restoration Company
DryMark was founded in 2011 by a former claims adjuster who spent years watching homeowners lose legitimate claims because no one wrote down what happened. That origin shapes how we work in Arlington today. Every job gets a written scope, a photo record on every visit, and daily drying logs that an adjuster can actually use. That’s the difference between an invoice that gets paid and one that gets questioned for six weeks.
Alicia Brennan leads our team under The Haven Standard, the operating agreement we’ve used since day one. Clause 1 is simple: written price before work begins. Not a ballpark. Not a verbal estimate. A written line-item scope you can read, question, and approve before anyone moves equipment through your door.
Arlington homeowners have told us the same thing for over a decade: they want a crew that answers the phone, shows up when promised, and leaves behind evidence of the work. We answer live, 24 hours a day, 7 days a week. No voicemail trees on emergency lines. And when our technicians arrive at a home near Lake Arlington or off Matlock Road, they’re background-checked, uniformed, and carrying professional-grade drying equipment from Dri-Eaz, Phoenix, and XPOWER.
Our Water Damage Restoration Services in Arlington
Here’s what we do most often for Arlington homes, and what each service actually involves.
Emergency Water Extraction
When a supply line bursts in a 1978 brick-veneer home off Arkansas Lane, the first hour matters. Standing water wicks into drywall, baseboards, and the carpet pad fast. Our crews arrive with truck-mounted extraction units and pull water from floors within hours of the call. Typical Arlington extraction jobs run $450 to $1,200 depending on affected square footage. We then place containment and begin drying immediately, because in Arlington’s humid spring months, extracted water doesn’t stay gone unless the air is actively dried.
Structural Drying & Dehumidification
This is where documentation matters most. Structural drying in an Arlington slab-on-grade home means placing low-grain refrigerant (LGR) dehumidifiers and high-velocity air movers to drive moisture out of drywall, framing, and ceiling cavities. We record psychrometric data (temperature, relative humidity, and dew point measurements) at every visit, producing the daily drying logs that show an insurance adjuster exactly when materials reached dry standard. A three-room drying job in Arlington typically runs $1,200 to $3,400 and takes 3 to 5 days under our monitoring.
Flood Cleanup
Flash flooding from Arlington’s spring storm season pushes contaminated water into homes near creeks and low-lying streets, which is why we offer Storm & Disaster Restoration in Arlington to handle these events. This water is almost never clean. It picks up lawn chemicals, sewage overflows, and whatever the street carried. We classify the water category on-site, remove and dispose of unsalvageable materials, and dry what can be saved. Flood cleanup jobs in Arlington typically run $2,500 to $7,000 depending on the water category and affected rooms.
Burst Pipe Restoration
Winter Storm Uri in February 2021 froze uninsulated attic and exterior-wall plumbing across thousands of Arlington homes. Original 1970s-1990s plumbing, including polybutylene and early copper with hard-water pinholes, remains in much of Arlington’s housing stock. When one of those lines fails, you don’t just need extraction, you need a restoration team that checks the entire supply line, not just the wet wall. Burst pipe restoration in Arlington runs $1,500 to $5,800, and we always photograph the failed pipe section for your claim file.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington
Our Arlington crews work on water damage in homes built with materials from every era of the city’s growth. We deploy Injectidry vacuum panel systems for drying hardwood floors and hard-to-reach wall cavities, and our drying equipment from Phoenix and XPOWER meets IICRC and RIA standards for structural drying performance. That matters in Arlington because older slab homes with plaster walls and original wood trim need controlled drying, not aggressive heat that cracks finishes. We document every system to IFA standards, so your claim file is defensible from day one.
Common Water Damage Restoration Problems We See in Arlington Homes
- Dual-source intrusion from hail above and slab cracks below. Arlington sits in one of the most hail-active corridors in the United States, and its expansive black gumbo clay soils heave and shrink seasonally, opening foundation cracks that admit ground moisture. Most restoration calls here involve both a roof breach and a below-grade pathway, and treating only one means mold returns within weeks.
- Wrong water classification on hail-damaged roofs. Water that has run through a decade-old asphalt shingle and dirty attic insulation is almost always Category 2, not Category 1. Crews that treat it as clean water dry contaminated drywall and insulation in place. We test on-site and remove what should be removed.
- Ignoring the slab movement while drying the ceiling. Restoration companies dry the upstairs leak but never check door frames, threshold gaps, or perimeter cracks. On a storm call near Fielder Road, our crew found a 1983 brick-veneer slab home with hail-battered original shingles leaking into the attic while a foundation crack along the north wall wicked moisture into the drywall. We dried both, not just the visible ceiling stain.
- Extraction-only calls on failed plumbing. An original copper line with hard-water pinholes doesn’t fail once. It fails, gets patched, and fails again 12 months later. We document the supply-line replacement need so the same wall doesn’t flood every winter.
Pricing for Water Damage Restoration in Arlington, TX
Here are honest ranges for Arlington’s market, based on what we’ve scoped and completed across the city:
- Emergency water extraction: $450 to $1,200 per affected room set
- Structural drying with daily monitoring: $1,200 to $3,400 for a typical 2-3 room event
- Flood cleanup (Category 2 water): $2,500 to $7,000
- Burst pipe restoration: $1,500 to $5,800 depending on wall and flooring scope
- Ceiling and roof leak water damage: $800 to $3,200 for drying plus drywall repair
What moves the number? Affected square footage, water category, whether materials like drywall and insulation must be removed, and how long water sat before extraction began. You’ll get a written price before work starts. Always. That’s Haven Standard, Clause 1. If you have a written estimate from another company, we’ll review it at no charge under our Free Second Opinion policy. Call (629) 213-4606.
We Also Serve Cities Near Arlington
Our crews serve Water Damage Restoration customers throughout Arlington and the surrounding Tarrant County communities, including Mansfield, Burleson, Cedar Hill, and Grand Prairie. Same dispatch team, same written-price policy, same Water Damage Restoration in Arlington documentation standards applied everywhere we work.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Water Damage Restoration in Arlington
Arlington’s expansive black gumbo clay soil heaves and shrinks with seasonal moisture changes, opening cracks in slab foundations that admit ground moisture from below. Fort Worth and Dallas have their own clay issues, but Arlington’s combination of 1970s-1990s slab-on-grade housing stock and severe hail exposure creates a dual-source water problem that requires checking both the roof and the slab on nearly every job. We scope for both before we start drying. If you’re seeing water stains without an obvious roof leak, call (629) 213-4606 and we’ll trace the source the same day.
No, and here’s why: water that has passed through a hail-damaged asphalt shingle and old attic insulation is almost always Category 2 contaminated water, not clean Category 1 water. Drying the ceiling without removing affected insulation and treating the water category properly leaves contaminated materials inside the ceiling cavity, and mold follows. We’ll document what’s contaminated, remove what should be removed, and dry the rest to standard. Then you can patch the roof correctly instead of chasing mold for the next two years.
For a slab-on-grade home, structural drying means placing LGR dehumidifiers and high-velocity air movers to pull water from drywall, framing, and ceiling cavities without forcing moisture down into the slab. We take daily moisture readings from affected materials, record them in a drying log, and adjust equipment placement until materials hit dry standard. That log is what your insurance adjuster sees, and it’s why our invoices don’t get questioned. Expect 3 to 5 days for most Arlington single-family homes.
The 2021 freeze exposed a structural vulnerability in thousands of Arlington homes: uninsulated attic and exterior-wall plumbing built between the 1960s and 1990s with freeze protection never designed for single-digit temperatures. If your pipes froze once, they’ll freeze again during the next hard freeze unless the lines are insulated or relocated. We document the supply-line condition on every restoration job so you know what to fix before next winter. We’ll include those photos in your claim file free of charge.
That’s a classic sign of slab movement from Arlington’s expansive clay soil. The foundation heaves and shrinks with wet-dry cycles, cracking the slab and opening pathways for ground moisture to wick up through the flooring. This isn’t a plumbing leak, and it isn’t a roof leak. It’s a below-grade water entry problem that requires drying the affected materials and then addressing the slab movement, which often means a foundation conversation before restoration can be considered complete. We’ll document everything and explain the foundation issue in plain language. Call (629) 213-4606 for an on-site assessment.
Written by Alicia Brennan, Owner at DryMark Restoration, serving Arlington since 2011.