Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Storm & Disaster Restoration Across Melbourne
Storm damage in Melbourne moves fast. The question most homeowners ask us is whether their walls are holding brackish water they can’t see. The answer depends on the age of the home, where the water came from, and how quickly drying starts. DryMark Restoration responds to Melbourne properties 24 hours a day, 7 days a week, with a live person answering the phone at (629) 213-4606. We arrive with moisture meters, thermal imaging, and written documentation, because a wall that feels dry on the surface may be soaking inside the block cavities.
Why DryMark Restoration Is Melbourne’s Preferred Storm & Disaster Restoration Company
Melbourne’s lagoon-front neighborhoods and mid-century concrete block homes present restoration challenges that out-of-area contractors consistently misread. We know this because our crews document what they find. Alicia Brennan founded DryMark Restoration in 2011 after working as a claims adjuster and watching homeowners lose legitimate claims to incomplete drying logs and vague scopes. That origin drives every job we do in Melbourne.
Our team in Melbourne carries professional-grade drying systems from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, and every moisture reading is logged daily to IICRC, RIA, and IFA standards. Before any work begins, you receive a written price. That’s Haven Standard, Clause 1, and it applies to every storm job we do in Brevard County. A photo record on every visit is included, not optional. If you have a competitor’s written estimate, bring it to us for a free second opinion. We’ll review the line items against what your home actually needs.
Our Storm & Disaster Restoration Services in Melbourne
Our Storm & Disaster Restoration division covers the full sequence of storm response, from board-up through structural drying and wind damage repair. The Melbourne properties we serve tend to need a specific mix of services because of the local housing stock.
Emergency Board-Up
Melbourne’s older CBS homes often have single-pane jalousie windows, and post-storm glass breaks are common. Board-up is what separates a contained damage event from an open breach that lets wind-driven rain into the structure for three days. We measure, cut, and secure storm-rated plywood panels over every opening the same day, and we document each panel before anchoring. That documentation matters for your insurer.
Roof Tarping
A tarp over a low-slope roof on a 1960s Melbourne home is a temporary fix with a specific job: stop water entry until a permanent repair can be written. We use reinforced polyethylene tarps anchored beyond the damage perimeter, then fold and seal the edges to resist peel-back in Brevard County wind gusts. Each tarp location is photographed and mapped so the adjuster can see exactly what was covered.
Flood Damage Restoration
Storm surge from the Indian River Lagoon is brackish, biologically active water, not clean rainwater. That changes the protocol. In Melbourne, we classify lagoon-origin water as Category 3 from the outset, remove affected drywall and carpet, and begin cavity drying immediately. Standard surface drying doesn’t reach what has wicked into the block. We run moisture mapping to establish the drying perimeter, then deploy Injectidry vacuum panels and high-volume dehumidifiers on a daily log.
Wind Damage Repair
Post-storm wind damage in Melbourne often hides behind intact drywall. Hairline stucco cracks, pulled fasteners at rooflines, lifted flashing, and jalousie frame separation all allow moisture to enter without visible structural failure. We inspect with thermal imaging and moisture meters, then write a repair scope that names what was found, room by room.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Melbourne
Melbourne homeowners deserve restoration equipment and documentation that insurance companies recognize. Our crews use Dri-Eaz dehumidifiers, Phoenix extraction units, XPOWER air movers, B-Air containment systems, and Injectidry vacuum panels, and every reading is documented to IICRC, RIA, and IFA standards. When you receive our drying log after a storm, it shows the equipment that was running, the room it was in, and the moisture reading at each inspection. That’s the difference between a claim that gets paid and a claim that gets questioned.
Common Storm & Disaster Restoration Problems We See in Melbourne Homes
- Brackish lagoon water trapped in CBS block cavities. Melbourne sits where the Indian River Lagoon channels storm surge directly onto the mainland. That water is salt-laden and biologically active, and when it wicks into unreinforced concrete block, surface drying won’t touch it. We drill injection ports and run vacuum panels for weeks in some cases to draw the water out.
- Cosmetic patches over old storm damage. Brevard County took two major hurricanes, Frances and Jeanne, within three weeks in September 2004. Many Melbourne homes still carry incompletely remediated moisture behind patched drywall from that season. We open those walls and document what’s there before rebuilding.
- Jalousie windows that were never storm-rated. Melbourne’s 1960s and 1970s aerospace-boom homes commonly have original single-pane jalousie frames. After a storm, someone caulks them, and the next wind-driven rain finds the same gap. Replacement has to be storm-rated, or the cycle repeats.
- Humidity above 75% turning delayed drying into mold. Melbourne’s year-round average relative humidity means water intrusion becomes a mold-growth environment within 24 to 48 hours if drying is delayed. A home that sat wet for three days after a hurricane is not a drying job. It’s a remediation job.
Pricing for Storm & Disaster Restoration in Melbourne, FL
We Also Serve Cities Near Melbourne
Our crews serve the full Melbourne metro and the cities around it, including Palm Bay, Rockledge, Sebastian, and Saint Cloud. If you’re in Melbourne proper, we’re running calls across the Eau Gallie district, along Wickham Road and U.S. 1, and through the neighborhoods near Holmes Regional Medical Center. Dispatch and scheduling are coordinated from our South Florida metro office, with crews serving Melbourne locally.
Serving Melbourne, FL - Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Storm & Disaster Restoration in Melbourne
Why is storm surge water from the Indian River Lagoon more damaging than ordinary floodwater for Melbourne homes?
Lagoon water is brackish, which means it carries salt, sediment, and biological material that freshwater floodwater does not. Salt retains moisture. Salt draws moisture from the air into porous block. That combination, in Melbourne’s humidity, means walls stay wet longer, mold blooms faster, and materials like drywall and carpet that might be salvageable after a clean-water flood often cannot be saved. We classify lagoon storm surge as Category 3 water from the first reading and follow the remediation protocol that requires. Call (629) 213-4606 if you think your home took lagoon water.
After a hurricane, how do you handle wind-damaged jalousie windows in older Melbourne CBS homes?
We replace damaged jalousie frames with storm-rated units, and we don’t caulk over cracks and call it done. Caulk fails. The fix that actually holds is a properly flashed, wind-rated replacement tied into the stucco with a water management detail at the base. If your jalousie window has been patched before and water is still getting in, the frame needs replacement, not another bead of sealant.
What should I do if my 1970s concrete block home has a roof tarp but water is still seeping into the walls?
The tarp is doing its job at the roof, which means the water you’re seeing is either already inside the wall or entering from another opening, like a crack in the stucco or an old jalousie frame that was never properly flashed. We can trace it with thermal imaging and moisture meters. The next step is often cavity drying the block itself, because concrete block holds water in its voids and surface drying will not reach it.
How quickly can you start emergency board-up in Melbourne after a named storm?
Same day, in most cases. Our Melbourne crews are pre-deployed when a named storm is projected to make landfall in Brevard County, so board-up starts as soon as roads open. Our phone line at (629) 213-4606 is answered by a person around the clock, and we’re running calls while other companies are still clearing voicemail.
Does Melbourne’s building code require wind-rated doors for post-storm repairs?
Yes. Brevard County enforces wind-load requirements that apply to any exterior door replaced after storm damage, and Melbourne has a high-velocity hurricane zone in some of its coastal and lagoon-front zones. A standard residential door sold at a big-box store often doesn’t meet the required wind rating. We spec doors that do, and we can pull the permit documentation if your insurer asks for it.
What Melbourne Homeowners Need to Know About Wind-Rated Doors Before the Next Storm
Melbourne’s Indian River Lagoon is a storm surge channel that delivers water directly onto the mainland, even when barrier-island communities take the first ocean blow. That geography matters for restoration. Our crews regularly handle brackish Category 2 and Category 3 water pushed by surge, mixed with wind-driven rain that enters through roof failures and window breaches. This is not a standard freshwater flood job, and treating it as one is a mistake we see repeated by crews unfamiliar with Florida masonry construction.
The other half of the problem is the housing stock. A substantial share of Melbourne’s residential inventory dates to the Space Coast aerospace boom of the 1960s and 1970s: concrete block and stucco construction, original single-pane jalousie windows, flat or low-slope roofs, and stucco cladding with hairline cracks that let moisture into block walls for years before anyone notices. When a storm hits, those same structures fail in predictable ways. In the historic Eau Gallie district, our techs used moisture mapping after a storm and found lagoon-origin floodwater had wicked into the unreinforced concrete block cavities of a 1960s CBS home, a condition standard surface drying cannot fix. We set up a containment barrier, drilled injection ports, and ran Injectidry vacuum panels for weeks to draw the brackish water out, followed by antimicrobial treatment. Demolition was the only alternative, and the owner wanted pre-loss condition.
That is the difference between surface drying and true structural drying. Most out-of-area contractors unfamiliar with Florida masonry construction see a dry wall and pack up. The wall is not dry. The block is holding water, and within 48 hours in Melbourne’s humidity, mold is blooming behind the drywall. This page exists because that specific failure mode, lagoon surge into 1960s concrete block, is the reason a standard water job in Melbourne becomes a multi-week cavity drying and mold prevention protocol.
Melbourne Storm Season: The Window That Matters
Hurricane season for Melbourne runs from June through November, but the practical window for preparation is shorter. September’s historical track, with Frances and Jeanne hitting three weeks apart in 2004, shows that Brevard County doesn’t need a direct hit to suffer widespread damage. The houses that fare worst are the ones where wind rated exterior doors were never installed, jalousie frames were left with decades of caulk patches, and roof flashing was never inspected. Before a storm, a wind-load inspection of doors, windows, and roof-to-wall connections is cheap compared to post-storm remediation. After a storm, the first 48 hours determine whether you’re drying a house or rebuilding a wall.
Documentation: What You Receive From DryMark Restoration
Alicia Brennan built DryMark around the documentation gap that costs homeowners their claims. That means you receive, on every Melbourne storm job, four written documents. First, a written scope with a line-item price before any work starts, per Haven Standard Clause 1. Second, a daily drying log with moisture readings, humidity measurements, and equipment records, documented to IICRC, RIA, and IFA standards. Third, a photo record on every visit, including before, during, and after images of every affected room. Fourth, a signed 365-Day Done Right Promise: if it’s not done right, we make it right. That isn’t a verbal assurance. It’s a written warranty under The Haven Standard, and it applies to every storm restoration job we complete in Melbourne.
Call DryMark Restoration for Storm & Disaster Restoration in Melbourne
If storm water has entered your Melbourne home, whether from lagoon surge, wind-driven rain, or a breached roof, call (629) 213-4606 now. We’ll send a documented assessment crew with moisture mapping, thermal imaging, and the equipment to stop the damage from compounding. The written price comes before the work starts, on every job. We’ve restored more than 12,000 homes since 2011, and every single one left with a written price, a photo record, and a documented drying log. Storm damage in Melbourne doesn’t wait, and neither should you.
Written by Alicia Brennan, Owner at DryMark Restoration, serving Melbourne since the brand’s founding in 2011.