Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Fast, Reliable Storm & Disaster Restoration Across Burbank
Storm damage in Burbank doesn’t wait for business hours, and neither do we. A wind-rated door that fails during a Santa Ana event can let embers into an attic in minutes. A debris flow off the Verdugo Mountains can push mud through a 1950s stucco ranch’s foundation vents overnight. Our Storm & Disaster Restoration team responds to Burbank calls immediately, with a live person answering 24/7 at (629) 213-4606. We know these streets, the fire-to-flood cycle that hits the foothills, and the specific failure points in Burbank’s post-WWII housing stock. When you call, you get a written price before anyone starts work. No exceptions.
Why DryMark Restoration Is Burbank’s Preferred Storm & Disaster Restoration Company
DryMark Restoration was founded in 2011 by a former claims adjuster who built the company around one documented gap: homeowners losing insurance claims because restoration work wasn’t recorded properly. That origin shapes every job we do in Burbank. We photograph every visit, log moisture readings room by room, and hand you a written scope before the first tool comes off the truck. Our crews are background-checked, uniformed, and licensed. Every technician’s license number is on the page. And every job carries the 365-Day Done Right Promise under The Haven Standard: if it’s not done right, we make it right. That’s not a marketing line. It’s a signed warranty stamped on every job.
Burbank homeowners tend to research before they call. They read the three-star reviews. They want to see what they’re paying for. We respect that. Our documentation-first approach means you’ll see exactly what we found, what we did, and what it cost, in writing, on every visit. If another company handed you an estimate and you want a second read, we review competitor quotes at no charge. Bring it to us. We’ll tell you if the scope holds up.
Our Storm & Disaster Restoration Services in Burbank

Wind Damage Repair
Burbank’s Santa Ana winds funnel through the mountain passes and hit the northern foothill neighborhoods hard. We regularly see wind-rated garage doors that were installed correctly but have since drifted out of alignment, leaving gaps that let wind pressurize the garage and lift the roof deck. We repair track damage, replace bent panels, reinforce jambs, and re-secure door hardware to the original wind-rating specification. A door that holds in 40 mph gusts is a door that keeps embers out during fire season.
Emergency Board-Up
When a storm blows out a window or a tree limb punches through a roofline in the Verdugo Crest or Hillside District areas, you need the opening sealed before the next rain or the next ember event. We board up with measured, cut-to-fit plywood, not whatever we can nail over the hole. Every board-up is photographed for your insurance file. The goal is security and weather resistance, same day, in writing.
Flood Damage Restoration
Burbank’s flatland homes, mostly 1940s through 1960s ranch builds, sit on tight lots with minimal drainage. When atmospheric-river rain overwhelms the storm drains and water comes in through foundation vents or under sill plates, the damage moves fast. We extract with truck-mounted systems, map moisture with thermal imaging and penetrating meters, and set structural drying with Dri-Eaz dehumidifiers and XPOWER air movers. Daily drying logs document the psychrometric data, which is the vapor pressure and temperature reading that proves the space is actually drying, not just looks dry. That log is what turns a restoration invoice into a payable claim.
Roof Tarping
Wind tears off shingles or a tree limb punctures a section of sheathing. Before repair can be scheduled, the roof needs to be water-tight. We install reinforced tarping secured with furring strips and cap nails, not just draped and weighted. Every tarp job includes photos of the damaged area, the tarp installation, and the written scope for the permanent repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Burbank
Burbank’s housing stock is older, and that means specific equipment gets deployed on nearly every job. We run Dri-Eaz dehumidifiers, XPOWER air movers, and B-Air blowers, with Injectidry systems for hard-to-reach cavities like behind lath-and-plaster walls. When we need specialty filters, motors, or replacement parts, we stock common components for the units Burbank homeowners most often have in place. We document every piece of equipment to IICRC standards, which is the restoration industry’s reference for water damage assessment and drying procedures. That documentation is your paper trail, not our preference.
Common Storm & Disaster Restoration Problems We See in Burbank Homes

- Wind-rated garage doors that fail during Santa Ana events. Many Burbank homes in the northern foothills have doors with wind-rating stickers but hardware that was never re-torqued after installation. When wind blows the door in, embers follow. We check and reinforce track, hinges, and bottom seals before fire season peaks.
- Debris-flow water misclassified as clean Category 1. Water coming off burned Verdugo slopes carries ash, soil, and organic matter. Treating it as clean water leaves contamination behind 1940s stucco and lathe. We classify flood water correctly, extract fully, and treat affected surfaces with antimicrobial agents before drying begins.
- Hidden moisture in original galvanized supply lines. Burbank’s hard Valley water corrodes galvanized pipes from the inside out. Pinhole leaks develop behind walls and under slabs, feeding mold growth for months before anyone notices. Our moisture mapping finds what you can’t see.
- Summer heat accelerating mold after water intrusion. When temperatures hit 100°F, which happens routinely in Burbank between June and September, mold colonization can show visible growth within 48 hours, not the typical 72. We prioritize structural drying on summer storm calls because the clock is genuinely shorter here.
Pricing for Storm & Disaster Restoration in Burbank, CA
We Also Serve Cities Near Burbank

Our crews work throughout the San Fernando Valley and nearby foothill communities. If you’re in Glendale, North Hollywood, Universal City, or Tujunga, we respond to storm damage calls in those areas too. The same written pricing, photo documentation, and 365-Day Done Right Promise apply. We know the drainage patterns, the building codes, and the fire-to-flood risks specific to each of these communities. Our dispatch is coordinated from the Los Angeles office, with crews serving Burbank locally.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Storm & Disaster Restoration in Burbank

Yes. Burbank enforces wind design requirements for homes in foothill and high-exposure zones, and when we repair storm damage to a door, window, or roof section in those areas, the replacement must meet the same wind-pressure rating as the original construction or the current code minimum, whichever is higher. We document the wind-rating specification on every repair scope so your insurance adjuster can verify compliance. Call (629) 213-4606 if you’re not sure what rating your home is required to meet.
We start with moisture mapping and thermal imaging to find saturated areas behind original lath-and-plaster walls, then set structural drying with Dri-Eaz dehumidifiers and XPOWER air movers. If we find corroded galvanized supply lines leaking inside the wall cavity, we flag that in the written scope as a separate repair item. We don’t just dry the symptom and walk away. The documentation shows what we found, what we dried, and what still needs a plumber’s attention.
The fire-to-flood cycle changes everything. Properties in the northern foothills that need ash and smoke remediation after an October wildfire are likely to call back for debris-flow or structural water cleanup after the first hard January rain hits those same burned slopes. That means our crews check for both phases on every foothill call. We inspect for ember entry points, check drainage paths, and document slope conditions in the initial assessment. You can’t get that from a generic Los Angeles restoration crew.
Yes. We repair or replace the door, re-secure the track and jambs to the original wind-rating specification, and then extract and dry any water that came inside before mold has a chance to start. In Burbank’s summer heat, that drying clock is short. Visible mold can appear within 48 hours at 100°F. We move fast on the drying phase while the door repair is being scoped and scheduled in writing.
We respond same day, and our live answer line is staffed 24/7 at (629) 213-4606. During heat waves, the priority is getting extraction and structural drying started before temperatures above 100°F push mold growth inside the 48-hour window. We coordinate crews from the Los Angeles office and dispatch locally to Burbank. Every job gets a written price before work starts, and a photo record on every visit.
Written by Alicia Brennan, Owner at DryMark Restoration, serving Burbank and the surrounding communities under The Haven Standard since 2011.






Before
After
Before
After