Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Fast, Reliable Storm & Disaster Restoration Across Inlet Beach
Storm damage in Inlet Beach moves fast, and so do we. When wind-driven rain pushes through unsealed 1940s siding on Walton Magnolia Lane or a hurricane tears shingles off a newer HardiePlank home near the 30A corridor, the difference between a contained repair and a full gut job is measured in hours. Our Storm & Disaster Restoration crews arrive in Inlet Beach with moisture meters, containment equipment, and a written scope before anyone touches a wall. Call (629) 213-4606 and a live person answers, day or night.
Why DryMark Restoration Is Inlet Beach’s Preferred Storm & Disaster Restoration Company
Inlet Beach homeowners call us because we document what we find. Not with vague notes, but with moisture readings, photo records, and a written price before work begins. That’s Haven Standard, Clause 1, and it applies to every job from a single window leak to a full Category 3 surge cleanup.
The local pros know Inlet Beach’s housing stock because we’ve worked inside it. We know that the 1940s and 1950s cottages along the original beachfront lots have framing that newer west-30A homes don’t, and that salt air attacks fasteners and garage hardware years before it shows up anywhere else. Response time to Inlet Beach is typically under two hours for emergency board-up and tarping during storm season. We stock galvanized and stainless hardware locally so we aren’t waiting on a parts truck while your roof is open.
Our Storm & Disaster Restoration Services in Inlet Beach

Storm Damage Cleanup
Storm cleanup in Inlet Beach starts with a walkthrough and a moisture map. We find where the water went, not just where it’s visible. For a 1950s cottage with original beadboard ceilings, that means checking rim joists and sill plates behind unsealed siding. For a post-2000 stucco home, it means tracing wind-driven rain through window flashings and soffit gaps. We remove debris, wet insulation, and damaged drywall, then set drying equipment sized to the affected square footage.

Flood Damage Restoration
Ground-level garages in Inlet Beach take the worst of storm surge. Category 3 water carries salt, sand, and whatever it picked up along the way. That’s contaminated water, and it requires more than a mop. We classify the water source, remove unsalvageable materials, disinfect surfaces, and run Phoenix dehumidifiers and XPOWER air movers with daily moisture readings documented to IICRC and IFA standards. You get the drying log, not just a bill.

Emergency Board-Up
Before a hurricane makes landfall, windows and doors need to be secured fast. But in Inlet Beach, aluminum hurricane shutters often corrode at the fasteners, leaving stripped screws and seized tracks exactly when you need them to work. Our board-up crews carry the right hardware for salt-exposed builds, and we don’t force corroded tracks that will fail the moment wind pressure hits. Board-up is temporary protection, done correctly so it holds through the storm.

Roof Tarping
A torn roof in Inlet Beach means wind-driven rain entering within minutes. We tarp using the FEMA dry-in method, secured with furring strips and cap nails, not just weighted corners. Tarps go on same day in most cases, and we photograph every seam before and after. If your adjuster questions the tarp, the photos answer.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Inlet Beach
Inlet Beach homes carry a specific mix of materials, from original 1940s pine siding to newer HardiePlank and stucco systems. The local pros work with Dri-Eaz and Phoenix drying equipment, XPOWER air movers, and restoration techniques documented to IFA standards. We keep common parts for Inlet Beach’s older garage systems and coastal hardware on hand, so emergency board-up and spring replacements don’t wait on shipping. If your home has a specific window brand or a custom shutter track, tell us when you call, we’ll bring what’s needed.
Common Storm & Disaster Restoration Problems We See in Inlet Beach Homes

- Hidden rot behind 1940s wood siding. Wind-driven rain penetrates unsealed siding and settles into sills and rim joists. By the time the wall feels damp, the framing underneath often reads 25% moisture content or higher. We find it with meters, not guesswork.
- Salt-corroded garage door springs snapping early. Torsion springs in Inlet Beach fail 2 to 3 years sooner than inland equivalents because salt air pits the steel. A snapped spring leaves the door stuck open, sometimes minutes before a storm. We replace with galvanized or coated springs rated for coastal exposure.
- Seized hurricane shutter tracks and stripped screws. Aluminum shutters corrode at fastener points in salt air. Emergency board-up crews arriving after a warning often find tracks that won’t slide. We address the corrosion so board-up is an option when you need it.
- Wind-driven rain through unsealed window and door flashings. Even newer Inlet Beach homes leak where flashing intersects stucco. The water travels inward and downward, staining ceilings two rooms away from the source. Our moisture mapping traces the path so we dry the right cavities.
Pricing for Storm & Disaster Restoration in Inlet Beach, FL
Storm damage cleanup in Inlet Beach typically runs $1,200 to $4,500 depending on affected square footage and water classification. Emergency board-up and tarping usually falls between $800 and $2,200 for a standard single-family home, with larger or elevated properties on the higher end. Flood damage restoration on a ground-level garage, including Category 3 water handling, disinfecting, and drying, generally ranges $3,500 to $12,000. Structural drying after hidden rot in original framing can push higher, especially when rim joists and sills need replacement. When we say hidden rot, the wall cavity likely needs more than a dehumidifier.
Every Inlet Beach job gets a written price before work starts. That’s Haven Standard, Clause 1, and it means the number won’t creep once the crew is inside. We’d rather show you the scope and let you approve it than discover surprises at invoice time.
We Also Serve Cities Near Inlet Beach

The local pros cover Inlet Beach and the surrounding 30A corridor, including Inlet Beach, Santa Rosa Beach, Freeport, Miramar Beach, and Destin. If you’re just east of 30A or a few miles inland, the same documentation-first process applies: written price, photo record, drying logs, and the Done Right Promise.
Serving Inlet Beach, FL - Our Local Coverage Area
We’re serving the Inlet Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Storm & Disaster Restoration in Inlet Beach

Mold can begin within 24 to 48 hours in Inlet Beach’s subtropical humidity, especially behind unsealed 1940s wood siding where cavities stay damp longer. We prioritize extraction and drying within the first day, and we document moisture levels daily until readings return to pre-loss condition. If you see water staining or smell must, call (629) 213-4606 and we’ll have a crew out the same day.
The biggest difference is what’s inside the walls. Original 1940s and 1950s cottages on Walton Magnolia Lane were built without sealed envelopes or modern flashing, so wind-driven rain penetrates the siding and settles into sills and rim joists. We restore those homes by removing wet insulation, drying the framing cavity, and replacing only what’s rotted, often saving original beadboard ceilings and interior finishes that newer construction methods would simply tear out. The goal is restoration, not replacement, unless the structure requires it.
Yes, if your home has any window, door, or roof opening that wind can pressurize. Once wind enters, it lifts the roof from inside, and the damage multiplies. In Inlet Beach, many shutters were installed years ago and have corroded at the fasteners, so don’t assume they’ll function. Our board-up crews arrive with the right hardware and secure openings with the FEMA dry-in method. Call before the storm, not after.
Category 3 water is considered grossly contaminated, meaning it carries sewage, salt, sand, and whatever the surge picked up. In a ground-level garage in Inlet Beach, we remove contaminated materials first, then disinfect all surfaces, then dry the structure with Phoenix dehumidifiers and XPOWER air movers. We document the entire process with photos and moisture readings so your insurer sees exactly what was done. This isn’t a job for a shop vac.
Salt air pits the steel in torsion springs, and repeated coastal storms add stress cycles, so springs in Inlet Beach fail 2 to 3 years earlier than inland springs. We replace broken springs with galvanized or coated versions rated for coastal exposure, and we inspect rollers, hinges, and tracks for corrosion at the same time. If your door is stuck open before a storm, call (629) 213-4606 and we’ll get it closed and secured.
Storm damage doesn’t wait, and neither should the documentation. If you’re in Inlet Beach, call (629) 213-4606 for a free estimate and a written scope. We’ll answer live, tell you when we can arrive, and send a uniformed, background-checked crew with the right equipment for the job.
Written by the team at DryMark Restoration.






Before
After
Before
After