Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Water Damage Restoration Across Melbourne
Water damage in Melbourne homes rarely announces itself politely. A cracked supply line lets go at 2 a.m. A 1968 CBS wall hides the fact that brackish Indian River Lagoon water has been wicking through its block cavities for three days. Whatever the source, the answer is the same: speed and the right drying protocol. Our Water Damage Restoration team is available 24/7 at (629) 213-4606, with a live person answering every call, no voicemail trees on emergency lines. We dispatch locally to Melbourne neighborhoods, we quote a written price before anyone starts work, and we document every visit with a photo record.
Melbourne’s older housing stock doesn’t forgive standard drying. A surface-dry concrete block wall can still hold gallons of lagoon water inside its cavities, feeding mold behind patched drywall for years. That’s why our approach starts with understanding how your home was built and where the water actually went, not just what’s visibly wet.
Key Takeaways:
- 24/7 emergency response to Melbourne; live dispatch at (629) 213-4606
- Written price before any work begins, every time (Haven Standard, Clause 1)
- Structural drying protocols built for CBS block construction, not just drywall interiors
- Documented photo record and daily moisture logs on every job, delivered as standard
- 365-Day Done Right Promise in writing, stamped on every scope
Why DryMark Restoration Is Melbourne’s Preferred Water Damage Restoration Company
DryMark Restoration was founded in 2011 by a former claims adjuster who saw the same pattern on repeat across Florida: honest homeowners denied claims because their contractor couldn’t produce documentation. That origin drives everything we do in Melbourne. We’re independently owned and operated, led by Alicia Brennan, and every job we run is built around evidence - written scopes, daily drying logs, room-by-room moisture readings, and a photo record your adjuster can actually use.
Melbourne customers call us because we understand what a 1963 CBS rancher off Wickham Road shares with a 1972 split-level near Sarno Road: unreinforced block walls, jalousie windows, and stucco that develops hairline cracks after fifty years of hurricane seasons. That knowledge changes how we dry a structure, and it changes what your insurance claim includes. We run professional-grade drying systems from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, with all work documented to IICRC, RIA, and IFA standards. A 365-Day Done Right Promise backs every job - if it’s not done right, we make it right, in writing.
Our Water Damage Restoration Services in Melbourne
Emergency Water Extraction
When water is still moving through a Melbourne home, every minute counts. Our Emergency Water Extraction crews arrive on-site with truck-mounted and portable extraction systems, and we begin removing standing water immediately. Extraction alone is not drying, though. On a CBS home in the Eau Gallie district, the visible water on the floor is often the smallest part of the problem. We scope the full loss before we start pulling water, so you know exactly what the written price covers.
Structural Drying & Dehumidification
This is where Melbourne’s housing stock separates real restoration from surface cleanup. Concrete block absorbs water differently than drywall or wood framing. In a 1968 CBS home off Eau Gallie Boulevard, our techs found category 3 lagoon water from Hurricane Frances had wicked through hairline stucco cracks into the unreinforced block cavities. We set up containment, used Injectidry panels to pull moisture from the block, and logged moisture readings every 12 hours until the drying logs showed the substrate was back to pre-loss condition before any reconstruction began. That’s the standard a Melbourne CBS home requires, and it’s the standard we document.
Psychrometric data - the temperature, humidity, and dew point readings that tell us how fast water is actually leaving a material - drives our drying decisions. We don’t guess when a wall is dry. We measure it.
Flood Cleanup
Floodwater in Melbourne is rarely clean water. Homes near the Indian River Lagoon and its canals face brackish, biologically active intrusion that leaves salt and contaminants behind long after the standing water is gone. Our Flood Cleanup crews treat lagoon-origin water as Category 3 from the start: full containment, antimicrobial application, and aggressive cavity-drying protocols for block walls. Skipping that step is exactly why some Melbourne homes get mold behind freshly patched drywall after every storm.
Burst Pipe Restoration
A burst supply line is cleaner water than a flood, but the drying protocol still matters. In Melbourne’s older homes, a burst pipe in a 1970s slab-on-grade ranch can push water under flooring and into the bottom courses of block walls. We map the migration path with moisture meters before we cut anything, so we’re not demolishing drywall that could have been saved, and we’re not leaving wet material that will fail later. The written scope lists exactly what gets removed and why.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Melbourne
Melbourne homeowners run a mix of drying equipment and plumbing hardware, and we service homes regardless of brand. Our crews work with professional-grade systems from XPOWER and B-Air, and we use Injectidry panels for hard-to-reach cavity drying in masonry walls, a critical tool for CBS block homes that surface extraction can’t touch. All equipment is maintained and calibrated to IICRC standards, and everything we run produces the documentation your claim needs. If you have a specific system or an older home with legacy plumbing and jalousie windows, we stock parts locally and schedule Melbourne jobs without waiting on out-of-state supply chains.
Common Water Damage Restoration Problems We See in Melbourne Homes
- Brackish lagoon water trapped in block cavities. Indian River Lagoon floodwater is salty and biologically active. It wicks into unreinforced concrete block and stays there unless the cavity is actively dried or opened. Surface drying leaves the problem behind the wall.
- Jalousie-window storm intrusion treated as Category 1. Melbourne’s 1960s-70s CBS homes still have original single-pane jalousie windows. Storm water that comes through them carries what was on the roof, the eaves, and the ground around the foundation. Treating it as clean freshwater skips required antimicrobial work.
- Mold in 24-48 hours, not weeks. Melbourne’s year-round average relative humidity runs above 75%. Wet drywall in a closed-up Florida house becomes a mold-growth environment within a day or two, which is why delayed structural drying turns a two-day job into a full rebuild.
- Cosmetic patches hiding prior storm damage. Brevard County took two major hurricanes - Frances and Jeanne - within three weeks in September 2004. Many Melbourne homes were patched and repainted without full drying. That hidden moisture becomes a recurring mold problem years later, and it’s often discovered only when a new leak forces the wall open.
Pricing for Water Damage Restoration in Melbourne, FL
We publish price ranges because Haven Standard, Clause 1 says a written price comes before any work begins. That’s not a slogan. It’s how every DryMark job in Melbourne starts. Here’s what Melbourne homeowners can expect:
| Service | Typical Melbourne Price Range |
|---|---|
| Emergency water extraction | $400-$900 per affected room |
| Structural drying with Injectidry cavity panels (CBS walls) | $1,200-$2,800 depending on number of wall cavities |
| Full flood cleanup with containment and antimicrobial | $2,500-$6,500 for a typical single-story CBS home |
| Burst pipe restoration including drywall removal and drying | $1,800-$4,200 per affected area |
| Ceiling water damage from roof leaks (flat-roof Melbourne homes) | $600-$1,500 per ceiling section |
What moves the number is square footage of wet material, the number of block cavities requiring injection drying, and whether the water is Category 1 clean water or Category 3 lagoon floodwater. We’ll give you a written scope with line items before anything is cut, and a Free Second Opinion on any written estimate from another contractor at no charge. Call (629) 213-4606 for an exact written quote.
We Also Serve Cities Near Melbourne
DryMark Restoration covers the full Melbourne metro and surrounding Brevard communities, including Palm Bay, Rockledge, Sebastian, and Saint Cloud. Water Damage Restoration crews dispatch locally to Water Damage Restoration in Melbourne area homes with the same written-price guarantee and immediate phone answer, 24 hours a day.
Serving Melbourne, FL - Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Water Damage Restoration in Melbourne
We use Injectidry panel systems placed against the block surface under negative pressure, which pulls water vapor from inside the block cavities through the wall face. In a 1960s CBS home, the unreinforced block has open cells that wick water far beyond the visible stain. We log psychrometric readings every 12 hours until the substrate reaches pre-loss moisture levels, then we document those readings in a drying log your insurer can review. Call (629) 213-4606 if you suspect water is trapped in block cavities now, because every day of delayed drying pushes more moisture deeper.
Because the wall is being surface-dried, not cavity-dried. Melbourne’s concrete block homes from the Space Coast aerospace era were built with unreinforced block that wicks storm and lagoon water into open cells behind the drywall. A contractor who dries the face of the wall and patches the drywall has left brackish, biologically active water inside the block, and Melbourne’s 75%+ average humidity turns that into mold behind the new patch within days. The fix is aggressive cavity drying or controlled block demolition, documented with moisture readings. Call us for a written scope.
Not always, but it depends on what the moisture readings say, not on how the water looked. A burst supply line is Category 1 water, and in some cases the drywall can be dried in place if the leak was caught quickly and the cavity behind it is drying. If the drywall has been wet more than 24-48 hours in Melbourne’s humidity, mold growth is already possible, and removal becomes the safer scope. We read moisture content before we recommend cutting, and the written scope tells you exactly why each surface is being removed or retained.
Brackish lagoon water is Category 3: salty, biologically active, and loaded with organic material. It leaves salt residue that continues pulling moisture from humid air, accelerates corrosion on metals, and requires antimicrobial treatment and full containment, not just extraction and drying. Rainwater intrusion is typically Category 1 or 2 depending on what it passed through. A Melbourne home near the lagoon or its canals that floods with brackish water needs a different, more aggressive protocol, and skipping it is exactly why some homes get repeat mold. We treat lagoon floodwater accordingly from the first scope.
Stop the water source, extract what’s pooled, and start structural drying with dehumidification within 24 hours. Melbourne’s flat and low-slope roofs on older CBS homes funnel water into ceiling cavities quickly, and the 75%+ humidity means mold growth starts within a day or two. We tarp the roof if needed, extract from the ceiling, set drying equipment sized to the affected square footage, and log moisture readings until the ceiling cavity is DryMark standard. Call (629) 213-4606 and we’ll walk you through the first steps over the phone, then dispatch a crew.
Call DryMark Restoration for Melbourne Water Damage Service
Water moves through a Melbourne home faster than most restoration crews arrive. Ours answer the phone live, 24 hours a day, seven days a week. Call (629) 213-4606 now and you’ll get a real person, a written price before work starts, and a documented photo record on every visit. If you have a competitor’s written estimate, bring it - we’ll review it at no charge. If it’s not done right, the 365-Day Done Right Promise says we make it right. That promise is in writing, under The Haven Standard, on every Melbourne job.
Written by Alicia Brennan, Owner at DryMark Restoration, serving Melbourne, FL with documentation-first water damage restoration since 2011.