Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Water Damage Restoration Across Hillsboro
Water damage restoration in Hillsboro, OR typically runs $2,800-$7,500 for a full dry-out, with emergency extraction alone ranging $900-$2,200 depending on affected square footage. Most Hillsboro homes we’re called to are 1990s-2010s tract builds where hidden wall-cavity moisture has been quietly feeding mold for years before anyone notices a stain. We’re DryMark Restoration, led by Alicia Brennan, and we’ve built our entire operation around one conviction: you deserve a written price before work begins, a photo record on every visit, and a drying log that makes your insurance claim straightforward. Call (629) 213-4606 and a live person answers, 24/7, no voicemail tree.
Why DryMark Restoration Is Hillsboro’s Preferred Water Damage Restoration Company
Hillsboro homeowners have a specific problem: housing stock that aged all at once. The Intel-driven building boom produced entire neighborhoods of near-identical construction, which means the same failure patterns repeat across hundreds of homes at the same time. We know which Tanasbourne subdivisions have original window flashing that’s failing, which Orenco-area crawl spaces sit close enough to the water table to stay damp through winter inversions, and which pre-1960s homes near downtown Hillsboro still have galvanized plumbing ready to burst in an atmospheric river cold snap.
Our crews arrive in Hillsboro from nearby dispatch coverage, fully equipped with Dri-Eaz and Injectidry drying systems documented to IICRC standards. Before any equipment gets plugged in, you get a written scope with a fixed price. Not an estimate range. A written price. That’s Haven Standard, Clause 1, and it’s been the rule on every job since 2011.
Every visit includes a documented photo record, room-by-room moisture readings, and daily drying logs you can hand directly to your adjuster. That’s what separates us from a company that shows up with fans and a handshake. We’re buying you a claim your insurer will pay without a fight.
Our Water Damage Restoration Services in Hillsboro
Emergency Water Extraction
When a supply line lets go at 2 a.m. in a Tanasbourne kitchen, the water doesn’t wait for business hours. Our emergency line is answered by a live person, and crews dispatch to Hillsboro immediately. We extract standing water with truck-mounted and portable units, map the migration path with moisture meters and thermal imaging, and document the affected area in square footage before we ever touch a wall. Typical extraction in Hillsboro runs $900-$2,200 for a single-room event, with Category 3 (sewage or exterior floodwater) on the higher end.
Structural Drying & Dehumidification
Hillsboro’s winter inversion fog keeps wall cavities damp for weeks at a stretch. That means structural drying here isn’t optional, it’s the difference between a claim that closes in ten days and mold that’s colonizing behind your drywall by day seven. We deploy Dri-Eaz dehumidifiers and high-volume air movers to create the vapor pressure differential that pulls moisture from OSB sheathing and framing back to the surface, where the dehu captures it. We measure progress daily with moisture meters and document every reading. A standard structural dry in Hillsboro runs $1,800-$4,500 depending on affected square footage and the number of drying chambers required.
Flood Cleanup
Hillsboro sits directly in the path of atmospheric river storms off the Pacific, and when a Pineapple Express delivers 3 inches of rain in a day, the Tualatin River’s tributaries and overworked storm drains push water into crawl spaces and garden-level rooms across the same neighborhoods at once. We handle floodwater extraction, contaminated material removal, antimicrobial treatment, and structural drying. Flood cleanup in Hillsboro ranges $2,500-$7,500, with the variable being how long the water sat before we arrived and what it touched.
Burst Pipe Restoration
Aged galvanized plumbing in pre-1960s downtown Hillsboro homes is a ticking clock during extended cold snaps. When those pipes fail, they dump water into basements that were never designed for fast extraction. We locate the failure, stop the source, extract the water, and dry the structure methodically. Burst pipe restoration in Hillsboro typically runs $1,800-$6,000, with the spread driven by whether the pipe was supply-side (clean water) or drain-side (Category 2 or 3).
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Equipment We Use in Hillsboro
We run professional-grade drying systems from Dri-Eaz, B-Air, and Injectidry, all documented to IICRC and RIA standards. For Hillsboro homes with tight crawl spaces and low clearances, Injectidry systems let us dry subfloor and sill plates without removing finished flooring above. We carry the equipment and materials for the housing stock Hillsboro actually has: OSB sheathing, vented crawls, and vinyl windows with failed nail-fins. No waiting on shipments while moisture spreads.
Common Water Damage Restoration Problems We See in Hillsboro Homes
- Silent decade-old intrusion from failed window nail-fins. The 1990s Intel-boom subdivisions near Tanasbourne used builder-grade vinyl windows with nail-fin flashing that fails quietly. Winter fog saturates the OSB sheathing behind the siding, and ten years later the hardwood cups or a ceiling stain bleeds through.
- Winter inversion fog keeping framing wet. Hillsboro sits on the Tualatin Valley floor, where cold marine air gets trapped for weeks. Any moisture that gets behind OSB sheathing stays there, converting to active mold colonization faster than in Beaverton or Forest Grove where the housing stock and microclimates differ.
- Atmospheric river storms overwhelming crawl spaces at scale. When a Pineapple Express hits, hundreds of similarly built homes across Hillsboro flood at the same time. We’re built to respond to that: live dispatch, multiple crews, and written scopes issued fast so you’re not waiting while water sits.
- Aged galvanized plumbing in pre-1960s downtown Hillsboro homes. The older core of Hillsboro has original pipe systems that fail during cold snaps, often catastrophically. The water migrates through plaster and lathe into basements with no sump and no drainage path, creating extraction challenges newer subdivisions don’t have.
Pricing for Water Damage Restoration in Hillsboro, OR
Here’s what we quote on record in Hillsboro: emergency water extraction runs $900-$2,200 for a single-room event. Structural drying runs $1,800-$4,500 depending on affected square footage and the number of drying chambers needed. Flood cleanup runs $2,500-$7,500. Full water damage restoration combining extraction, drying, antimicrobial treatment, and repairs typically lands between $2,800 and $7,500. The variables that move the number: how long the water sat, what class of water it is (clean, gray, or black), and how many surfaces it touched. You get the exact number in writing before we start. That’s Haven Standard, Clause 1. We also offer a free second opinion on any competitor’s written estimate. Call (629) 213-4606.
We Also Serve Cities Near Hillsboro
Our crews serve Hillsboro and the surrounding Tualatin Valley communities, including Beaverton, Sherwood, Tualatin, and Forest Grove. If you’re in one of those areas and water is moving where it shouldn’t, call Water Damage Restoration dispatch at (629) 213-4606. For specifics on our Hillsboro coverage, see Water Damage Restoration in Hillsboro.
Serving Hillsboro, OR - Our Local Coverage Area
We’re based in the Hillsboro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Water Damage Restoration in Hillsboro
Hillsboro sits on the Tualatin Valley floor, where winter inversion fog traps cold, moisture-saturated air for weeks at a stretch, keeping wall cavities and framing damp long after the water source is shut off. Combined with the valley’s seasonally elevated water table, this creates conditions where mold begins colonizing in as little as five to seven days after an intrusion, versus the ten to fourteen days typical in Beaverton’s better-drained and more age-diverse housing stock. The speed difference is real and measurable in moisture readings we take daily. If water has been sitting in your Hillsboro home, call (629) 213-4606 immediately.
We use moisture mapping and thermal imaging to trace the migration path that water took behind walls, under flooring, and through framing, because in 1990s tract construction the visible staining is often nowhere near the actual intrusion point. A failed window nail-fin, for example, lets winter fog penetrate the OSB sheathing for years before you see a ceiling stain or notice your hardwood cupping. We document affected square footage and material moisture content with meters, then write a scope based on what the readings show, not what the surface suggests. That documentation is yours, and it’s what makes the insurance claim straightforward.
When a Pineapple Express storm overwhelms drainage across Tanasbourne and the surrounding subdivisions, we shift to storm response protocol: live dispatch 24/7, additional crews staged for Hillsboro, and written scopes issued in order of water class and structural risk. Homes with Category 3 exterior floodwater get first priority for extraction and antimicrobial treatment because the contamination risk is highest. We document every affected home with the same standard: photo record, moisture map, written price before work begins. If your home flooded in a recent storm, call (629) 213-4606 and we’ll get a crew to you.
You can reduce standing water with a wet-vac and improve airflow, but properly drying the subfloor and sill plates at the depths typical in Orenco crawl spaces requires equipment and moisture monitoring that rental fans can’t provide. The subfloor in that area of Hillsboro often reads 25-30% moisture content after a pipe burst, and unless you’re pulling the moisture out with a dehumidifier sized for the cubic footage and verifying the drying curve daily with a moisture meter, you’ll get surface-dry while the framing stays wet. That’s how mold establishes itself invisibly. For a written scope and price, call (629) 213-4606.
That smell is almost always hidden moisture in the wall cavities or crawl space, driven by Hillsboro’s winter inversion pattern where saturated marine air sits over the valley for weeks. In 1990s tract construction, the original housewrap laps and window nail-fins have often failed silently, letting that damp air reach the OSB sheathing and framing. The surface looks fine; the cavity is holding moisture. We can trace that with thermal imaging and moisture mapping, then dry it properly. If you’ve noticed the smell every December through February, call (629) 213-4606 for a documented assessment before spring arrives and the mold count rises.
Written by Alicia Brennan, Owner of DryMark Restoration, leading water damage restoration in Hillsboro, OR under The Haven Standard.