Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Storm & Disaster Restoration Across Hemet
Storm damage in Hemet rarely looks like a single problem. When monsoon runoff from the San Jacinto foothills pushes sediment-rich water into the flat valley floor, or when wind tears roofing from a 1970s-era manufactured home off Florida Avenue, the damage is usually layered: water behind skirting, saturated belly-board insulation, delaminating subfloor, and debris strewn across the yard. Our Storm & Disaster Restoration team handles all of it, starting with a written scope and price before any work begins. If you’re standing in water or looking at a missing roof section right now, call (629) 213-4606. A live person answers, day or night.
Why DryMark Restoration Is Hemet’s Preferred Storm & Disaster Restoration Company
Hemet keeps us busy, and the work here looks different from every other city in the Inland Empire. We’re dispatched from the brand’s Inland Empire office, and our crews drive into Hemet several times a week during storm season and wildfire smoke events. The housing stock tells you why: manufactured homes and mobile home parks dominate entire neighborhoods east of State Street and north of Stetson Avenue, and those HUD-code units fail differently under water than a stick-built tract home does. Alicia Brennan built DryMark Restoration in 2011 around a documentation-first approach, and that matters in Hemet because insurers routinely push back on storm scopes that don’t include what’s underneath the home.
Every Hemet job we take gets the same treatment: a written price before work starts (Haven Standard, Clause 1), a photo record on every visit, daily moisture logs from Dri-Eaz and Injectidry equipment, and a signed 365-Day Done Right Promise. We were founded by a former claims adjuster, so we write scopes the way adjusters read them: room by room, material by material, with readings and photos to match.
Our Storm & Disaster Restoration Services in Hemet
Flood Damage Restoration
Flood damage in Hemet is rarely clean. Monsoon and atmospheric-river events channel debris-laden runoff off the San Bernardino foothills into the valley floor, and that water carries silt, mud, and whatever it picked up on the way down. We classify it correctly, treat it correctly, and document the entire process. For manufactured homes, that means pulling skirting, inspecting the belly board and chassis, and checking the belly insulation with moisture meters before we touch a single interior wall. In Hemet’s summer heat, mold can establish in a saturated undercarriage within 48 hours if it’s not caught.
Debris Removal
After a wind event or flash flood in Hemet, the debris isn’t just ugly. It’s often contaminated. Sediment from the San Jacinto Valley floor gets into everything, and once it’s wet, it holds category 3 water against whatever it touches. Our crews remove debris with the same documentation standard we apply to structural drying: photographed, bagged, and logged before it leaves the property. That record goes to your insurer, and it usually eliminates the back-and-forth over what was removed and why.
Emergency Board-Up
When wind tears a roof or a tree limb goes through a window on a Hemet property, the next storm doesn’t wait for a convenient time. We board up openings immediately to stop further intrusion, then photograph everything before and after. For mobile home parks around Hemet, this is especially time-sensitive: wind-driven rain through a broken window can saturate a compressed-wood subfloor in under an hour. Board-up is a stopgap, but it’s a documented one, and it usually prevents the second loss most homeowners don’t see coming.
Roof Tarping
Tarping in Hemet means working on roof pitches that were rarely engineered for heavy water loading. Many 1970s and 1980s manufactured homes have shallow-pitch or flat roofs, which means ponding water finds its way under the tarp seams if the tarp isn’t installed correctly. We secure tarps with a water-shedding overlap and photograph the entire install, including the perimeter fastening points. If your insurer later asks whether secondary damage was preventable, the photo record answers that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hemet
We deploy professional-grade drying systems from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, and every drying decision is documented to IICRC, RIA, and IFA standards. That’s not a marketing line. The psychrometric data those machines produce, meaning temperature, relative humidity, and vapor pressure readings taken room by room, becomes the daily drying log that turns a restoration invoice into a payable insurance claim. For Hemet’s manufactured homes, we regularly use Injectidry systems to pull moisture from cavities that conventional air movers can’t reach: belly boards, chassis channels, and the spaces behind vinyl skirting.
Common Storm & Disaster Restoration Problems We See in Hemet Homes
- Water migrating beneath the belly board of a manufactured home. Visible drywall might look fine while the undercarriage is saturated. In Hemet’s mobile home parks, we routinely find moisture trapped under the skirting that never touched an interior wall. Pull the skirting first, then scope the interior.
- Sediment-heavy flash flood water being treated as a clean Category 1 loss. Valley-floor runoff in Hemet carries silt, organic matter, and sometimes sewage from overwhelmed systems. If it’s treated as a clean pipe burst, the antimicrobial treatment fails and the callback happens within weeks. Correct classification matters.
- Aging polybutylene or galvanized supply lines failing during storm-driven ground shifts. Many 1970s-era Hemet manufactured homes still have original polybutylene plumbing. When saturated ground shifts, those lines crack. Structural drying can’t stabilize until the plumbing is addressed, so we flag it early and coordinate the repipe before drying begins.
- Compressed-wood subfloors delaminating after even minor water intrusion. Hemet’s manufactured housing stock uses a lot of particleboard subfloor material. It swells fast. Once it delaminates, the section has to come out. Early extraction and targeted drying save sections that would otherwise be lost.
Pricing for Storm & Disaster Restoration in Hemet, CA
Storm and disaster restoration pricing in Hemet reflects the scope, not a flat fee. Emergency board-up here typically runs $450 to $1,200 depending on the number of openings. Roof tarping on a single-wide manufactured home often runs $600 to $1,400, and on a larger double-wide or site-built roof, $1,000 to $2,200. Flood damage mitigation, meaning extraction, drying equipment, and daily monitoring, typically runs $3,500 to $9,000 for a moderate single-wide loss in Hemet, and $7,000 to $18,000 for a whole-home sediment flood with category 3 water. Debris removal is usually $400 to $1,800 depending on volume and whether the material is contaminated. Every one of these ranges gets locked into a written scope before we start. If you’ve already got a competing written estimate, bring it in. We’ll review it at no charge.
We Also Serve Cities Near Hemet
We serve Storm & Disaster Restoration in Hemet and surrounding communities, including San Jacinto, Sun City, Menifee, and Banning. When flash flooding hits the San Jacinto Valley, it doesn’t respect city limits, and neither do our dispatch zones. Same team, same written-price standard, same 365-Day Done Right Promise.
Serving Hemet, CA - Our Local Coverage Area
We’re based in the Hemet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Storm & Disaster Restoration in Hemet
It adds an entire structural cavity that stick-built homes don’t have: the undercarriage. In a Hemet manufactured home, flood water enters through the skirting at ground level and saturates the belly board, insulation, and chassis long before it reaches the interior walls. A correct scope starts by pulling skirting panels and inspecting underneath, which means the drying plan includes equipment placed under the home, not just inside it. Call (629) 213-4606 and we’ll walk you through what a undercarriage-first scope looks like for your specific unit.
Yes, and faster than most people expect. Hemet’s summer heat accelerates mold growth in moist, dark cavities, and the undercarriage of a manufactured home is exactly that. We’ve seen visible mold establish underneath a flooded single-wide in under 48 hours when outside temperatures were above 95°F. The answer to mold here is speed plus targeted drying of the undercarriage, not just the interior. If you’ve had water in the last two days, call (629) 213-4606 to get someone out before it colonizes.
The sediment load and the classification. Clean pipe water is category 1. Flash flood runoff from the foothills is category 3: it carries dirt, organic matter, and whatever it picked up across the valley floor, which means the drying plan has to include antimicrobial treatment, soil removal, and more aggressive material disposal. It’s a different job, and it’s priced and scoped differently. If your Hemet property took valley-floor runoff, don’t let anyone quote it as a clean-water loss.
Both. Hemet sits downwind of fire-prone terrain in the San Jacinto and Santa Rosa Mountains, and smoke and ash events are a recurring restoration category here. We handle smoke and soot infiltration, HVAC duct contamination, and particulate cleanup in manufactured and site-built homes alike. After events like the 2013 Mountain Fire, we spent weeks cleaning ash from homes across Hemet’s eastern neighborhoods. If you’re in the middle of that right now, call (629) 213-4606 and we’ll get a team out with the right air scrubbers and chem-sponge equipment.
By photographing what the adjuster can’t see from the driveway. That means pulling skirting, taking moisture readings of the belly board and insulation, photographing the delaminating subfloor, and logging every reading daily until the drying target is met. We were founded by a former claims adjuster, so we build the file the way an insurer reviews it: line by line, with evidence for every material classification and disposal decision. That documentation is standard on every Hemet job, and it’s why insurers process our storm scopes with fewer disputes.
Written by Alicia Brennan, Owner at DryMark Restoration, serving Hemet with written-price storm restoration and documentation-first insurance files since 2011.