Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Damage Restoration in Arlington, VA
Mold remediation in Arlington usually costs $1,400 to $3,900 for a complete job, and the driving factor is almost always the 1965-1995 slab-on-grade housing stock that dominates the city. Those brick-veneer homes sit on Tarrant County’s expansive clay, which shrinks and swells with every seasonal rain cycle and opens hairline foundation cracks that let ground moisture into wall cavities. If you’re seeing dark staining at baseboards or a musty smell that moves from room to room, call (629) 213-4606 and we’ll send a technician with moisture meters and a written scope before any work begins.
Why Arlington Homes Are Different
Arlington sits inside one of the most hail-active corridors in the country, and the city’s dominant housing type, brick-veneer slab-on-grade homes built between roughly 1965 and 1995, carries original or single-replacement roofing that is now at or past its rated lifespan. Hail breaches a roof; water moves through attic insulation and down wall cavities; and within 48 to 72 hours, mold is colonizing drywall in a house that was dry on Monday. That’s the standard Arlington sequence.
But the city has a second water pathway that neighboring areas with sandier soils don’t face at the same scale. Tarrant County’s “black gumbo” clay expands when wet and shrinks in summer heat, which heaves slab foundations seasonally. We routinely find interior door frames that no longer close square, drywall seams that have opened at the corners, and perimeter slab cracks that admit ground moisture from below at the same time a hail-damaged roof is letting water in from above. A restoration job in Arlington is often a dual-source drying problem, and any scope that ignores the foundation movement conversation is incomplete before the first fan is set.
Winter Storm Uri in February 2021 exposed the plumbing reality of this housing generation. Thousands of Arlington homes were built with uninsulated attic and exterior-wall supply lines, and when temperatures dropped, those pipes froze and burst by the hundreds in the same week. The restoration demand overwhelmed regional capacity for months. We carry those lessons into every Arlington job: check the attic plumbing, check the slab perimeter, and document both before writing a single line of a scope.
Our Main Arlington Services
Two services generate the majority of emergency restoration calls in Arlington because they track directly to the city’s hail season and its freeze vulnerability. Each has a dedicated Arlington service page.
Water Damage Restoration in Arlington
Supply-line failures in 1970s and 1980s Arlington homes with original polybutylene or early copper plumbing are a repeated source of interior water damage that has nothing to do with weather. Combined with roof breaches from March to June, water intrusion here is a year-round condition. We run daily moisture logs and structural drying protocols from Dri-Eaz and Phoenix equipment, documented to IICRC standards. Water Damage Restoration in Arlington covers the full process.

Storm & Disaster Restoration in Arlington
Spring hail in Arlington punches through aging composite shingle and modified bitumen roofs, and the damage often doesn’t announce itself until a ceiling stains weeks later. Storm restoration here means tarping a roof, extracting water from a slab-on-grade interior, and then drying inside wall cavities while a roofer works above. We coordinate that sequence daily through June. Storm & Disaster Restoration in Arlington walks through it.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterMold Remediation in Arlington


Mold remediation in Arlington typically costs $1,400 to $3,900 for a full job, and most of what we find starts with a roof breach or a slab crack that nobody addressed for months. The city’s brick-veneer slab homes from 1965 to 1995 trap moisture in wall cavities and behind vinyl wallpaper, and once mold establishes itself, it spreads through HVAC returns before most homeowners even see it. That’s why Mold Remediation work here begins with a moisture investigation, not just a visual inspection.
Mold Inspection & Testing
Signs you need it
Musty odor that persists after cleaning, visible staining on baseboards or ceiling corners, or allergy symptoms that improve when you leave the house.
What it costs in Arlington
Professional mold inspection in Arlington runs $250 to $550, including moisture-meter readings and lab analysis when sampling is needed.
How we do it
We map moisture intrusion with pin-type meters, check slab perimeter and attic framing, and collect air or surface samples only if visible mold is already present.
Mold Removal
Signs you need it
Confirmed mold growth larger than ten square feet, discoloration behind furniture, or a remediation report from an inspector that recommends containment.
What it costs in Arlington
Mold removal in Arlington ranges $1,400 to $3,900 depending on affected square footage and whether containment is needed.
How we do it
We set negative-air containment, remove affected drywall and insulation to clean substrate, treat remaining surfaces with EPA-registered antimicrobial, and run HEPA air scrubbers until post-remediation verification passes.
What Mold Remediation Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Mold inspection & testing | $250 - $550 |
| Mold removal (10-100 sq ft) | $1,400 - $3,900 |
| Air quality restoration | $500 - $900 |
How long does mold remediation take in Arlington?
Most Arlington mold removals finish in 2 to 4 days. Post-remediation verification takes another 24 to 48 hours. Call (629) 213-4606 for a written scope based on your square footage.
Does homeowner’s insurance cover mold in Arlington?
Usually only when mold results from a covered water event like a burst supply line or hail roof breach. Photo documentation and daily drying logs improve claim outcomes, so call (629) 213-4606 for a documented assessment.
Fire & Smoke Damage Restoration in Arlington


Fire and smoke restoration in Arlington runs $2,200 to $5,800 on average, and the city’s older slab-on-grade homes present a specific challenge: smoke moves through wall cavities and HVAC returns that were never sealed to modern standards. Arlington’s 1965-1995 housing stock often has open framing chases and single-return systems, which means a kitchen fire in one room distributes soot through every register in the house. We scope Fire & Smoke Damage Restoration work with that reality in mind.
Smoke & Soot Removal
Signs you need it
Soot film on walls, ceilings, or inside cabinets after a fire, or a lingering burned smell that returns whenever the HVAC runs.
What it costs in Arlington
Smoke and soot removal in Arlington typically ranges $2,200 to $5,800 depending on square footage and whether HVAC cleaning is needed.
How we do it
We dry-clean or wet-clean soot from every surface by material type, clean duct interiors, and seal remaining odor sources before repainting or refinishing.
Odor Removal & Deodorization
Signs you need it
Smoke odor that persists after surface cleaning, especially in older Arlington homes with unsealed wall chases and return plenums.
What it costs in Arlington
Thermal fogging and ozone treatment in Arlington generally runs $500 to $1,000 when bundled with soot removal.
How we do it
We deploy hydroxyl generators or thermal foggers room by room, then re-verify with a third-party olfactory panel before calling the job done.
What Fire & Smoke Damage Restoration Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Smoke & soot removal | $2,200 - $5,800 |
| Odor removal & deodorization | $500 - $1,000 |
| Contents cleaning & pack-out | $900 - $2,500 |
How fast can someone get to an Arlington fire damage call?
We dispatch within hours, not days, for emergency board-up and soot containment. Call (629) 213-4606 and a live person answers, 24/7.
Will insurance cover fire and smoke restoration in Arlington?
Most homeowner policies cover fire and smoke damage as a named peril. We provide a documented photo record on every visit and a written scope for your adjuster.
Sewage Cleanup in Arlington


Sewage cleanup in Arlington averages $2,000 to $4,500 and often starts with the same aging plumbing that makes water damage common here: cast-iron waste lines in slab foundations from the 1960s through 1980s. When those lines crack or clog, effluent backs up through floor drains and tubs, and because Arlington homes sit on slab, there’s no crawlspace to inspect. We handle Sewage Cleanup as a Category 3 water event, which means containment, extraction, and disposal under strict protocols.
Sewage Backup Cleanup
Signs you need it
Water backing up through a floor drain, toilet, or tub, especially when it smells of sewage and won’t drain after plunging.
What it costs in Arlington
Sewage backup cleanup in Arlington ranges $2,000 to $4,500 for extraction, removal, and sanitization of affected materials.
How we do it
We extract with truck-mounted equipment, remove contaminated drywall and flooring, power-wash affected surfaces with antimicrobial, and run air scrubbers until humidity normalizes.
Sanitization & Disinfection
Signs you need it
Any sewage event where effluent touched porous materials like drywall, carpet, or linens that cannot be laundered on-site.
What it costs in Arlington
Sanitization and disinfection after sewage in Arlington typically runs $500 to $1,200 when bundled with extraction.
How we do it
We fog affected spaces with EPA-registered disinfectant, wipe every hard surface, and verify with adenosine triphosphate (ATP) testing before releasing the area.
What Sewage Cleanup Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Sewage backup cleanup | $2,000 - $4,500 |
| Black water extraction | $500 - $1,200 |
| Sanitization & disinfection | $500 - $1,200 |
Can I stay in my Arlington home during sewage cleanup?
Usually no, not until containment and disinfection are complete. Category 3 water carries pathogens that affect the very young, the elderly, and anyone with respiratory issues. Call (629) 213-4606 for an immediate assessment.
Does insurance cover sewage backup in Arlington?
Only if you carry a specific sewer-backup endorsement on your policy. Most standard HO-3 policies exclude it by default. We document everything and coordinate directly with your adjuster, so call (629) 213-4606.
Biohazard & Crime Scene Cleanup in Arlington


Biohazard cleanup in Arlington costs anywhere from $1,500 for a contained blood spill to $6,000+ for an unattended death or hoarding situation, and this work is never about cleaning alone. Arlington’s slab-on-grade homes mean biological fluids seep into concrete, not crawlspace dirt, and the concrete itself must be treated or sealed after surface remediation. We provide Biohazard & Crime Scene Cleanup with discretion, documentation, and full regulatory compliance.
Biohazard & Crime Scene Cleanup
Signs you need it
Any incident involving blood, bodily fluids, or decompensation that falls outside normal janitorial scope and requires regulated disposal.
What it costs in Arlington
Crime scene cleanup in Arlington typically runs $1,500 to $5,000 depending on the area affected and the materials requiring removal.
How we do it
We contain the scene, remove affected porous materials under OSHA bloodborne pathogen standards, treat remaining surfaces, and document every step for insurance or legal purposes.
Hoarding Cleanup
Signs you need it
Accumulated contents that block access or create rodent, mold, or fire hazards, especially in older Arlington homes with original single-return HVAC systems.
What it costs in Arlington
Hoarding cleanup in Arlington runs $2,500 to $6,000+ depending on volume, debris type, and whether structural repairs follow.
How we do it
We work with the resident and family on a room-by-room plan, sort salvageable contents from debris, and coordinate disposal through licensed haulers before restoration begins.
What Biohazard & Crime Scene Cleanup Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Blood & bodily fluid cleanup | $1,500 - $4,000 |
| Unattended death cleanup | $2,500 - $6,000+ |
| Hoarding cleanup | $2,500 - $6,000+ |
Who pays for crime scene cleanup in Arlington?
Homeowner’s insurance usually covers it under the dwelling or personal property policy, and we bill directly. In some cases, the Arlington victim assistance program helps. Call (629) 213-4606 for guidance on your specific situation.
How quickly can biohazard cleanup begin in Arlington?
Same day, every day. We keep a live dispatch line answered by a person 24/7, and we arrive with containment materials and written scope documents ready. Call (629) 213-4606 now.
Reconstruction & Cleanup in Arlington


Reconstruction and cleanup after a restoration event in Arlington generally runs $4,000 to $12,000, and the city’s older slab homes require more than drywall patchwork. Original 1960s and 1970s framing, single-pane windows, and slab foundation movement mean that rebuilding a water-damaged wall often reveals a second problem behind it. We approach Reconstruction & Cleanup as a documented rebuild, not a cosmetic fix.
Drywall & Flooring Repair
Signs you need it
Water-stained drywall, swollen baseboards, or flooring that cups or buckles after a roof leak or supply-line failure.
What it costs in Arlington
Drywall and flooring repair in Arlington ranges $4,000 to $12,000 per affected room when framing and subfloor are stable.
How we do it
We cut DryMark substrate, verify framing is sound with a moisture meter, replace drywall and flooring by material type, and match ceiling texture before repainting.
Contents Restoration & Pack-Out
Signs you need it
Furniture, documents, or personal items damaged by water, smoke, or soot that need off-site cleaning and storage while the structure is rebuilt.
What it costs in Arlington
Contents pack-out and restoration in Arlington typically runs $900 to $2,500 per room of contents, excluding storage.
How we do it
We inventory every item with photographs, pack in numbered boxes, clean at our facility, and return items only after final verification and your sign-off.
What Reconstruction & Cleanup Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Drywall & flooring repair | $4,000 - $12,000 |
| Contents restoration & pack-out | $900 - $2,500 |
| Post-construction cleanup | $400 - $900 |
Do I need a permit for reconstruction in Arlington?
Yes, for structural work and most drywall or plumbing replacement beyond cosmetic repair. We pull permits through the City of Arlington’s building department and document the approval in your file.
How long does reconstruction take in Arlington?
Most single-room reconstructions finish in 2 to 3 weeks. Larger jobs with foundation repair can extend to 6 to 8 weeks. We give you a written timeline before work starts, so call (629) 213-4606.
Brands We Service in Arlington

We service restoration projects involving every major equipment brand, with replacement parts and drying technology from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry stocked in local vans. See our brands for the full compatibility list.
Pricing for Damage Restoration in Arlington, VA
| Service | Typical range in Arlington |
|---|---|
| Mold inspection & testing | $250 - $550 |
| Mold removal | $1,400 - $3,900 |
| Smoke & soot removal | $2,200 - $5,800 |
| Odor removal & deodorization | $500 - $1,000 |
| Contents cleaning & pack-out | $900 - $2,500 |
| Sewage backup cleanup | $2,000 - $4,500 |
| Blood & bodily fluid cleanup | $1,500 - $4,000 |
| Drywall & flooring repair | $4,000 - $12,000 |
| Post-construction cleanup | $400 - $900 |
What pushes price up in Arlington is almost always the second source: a slab crack under the water damage, or an HVAC return carrying soot to rooms that were never burned. We name every line item in a written scope before work starts, under Haven Standard, Clause 1, and that’s the price you pay unless you change the scope.
Neighborhoods We Serve in Arlington

We cover the entire city of Arlington, from the established 1970s subdivisions east of Cooper Street to the newer developments in the south. Response time across the city is typically under 90 minutes for emergency water and sewage calls.
- North Arlington
- Central Arlington
- Dalworthington Gardens
- Pantego
- East Arlington
Service Area - Cities Near Arlington
We also serve homeowners across the DFW metroplex. If you’re in Alexandria, VA, Reston, VA, Centreville, VA, or Manassas, VA, the same written-price promise and documentation standards apply.
Serving Arlington, VA - Our Local Coverage Area

We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Damage Restoration in Arlington
Under 90 minutes in most cases, day or night. A live person answers every call at (629) 213-4606, and the crew arrives with moisture meters, containment materials, and a written scope ready before any work starts.
Some do, especially in gated communities and newer subdivisions. We check HOA rules before starting and schedule accordingly, which matters more for reconstruction than for emergency mitigation.
Yes. We photograph every visit, log daily drying readings, and provide a written scope that matches what your adjuster needs. We’ll submit directly to your insurer and coordinate with the adjuster on site.
What happens when you call
- 1A real person answersNo phone trees - talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Daily moisture readings, written down, room by room. When the adjuster questioned the drying time they sent the log and the conversation ended."
- Constance E."Professional through a genuinely awful week. Explained each stage before it happened."
- Kalila R."Burst supply line upstairs. They had equipment in the house within a few hours and told me honestly which flooring could be saved and which could not."
- Jarrod P.






Before
After
Before
After